Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ANEX A 016H
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
SYNTHETIC LEATHER
Manufacturers & Suppliers
Anex Chemicals and adhesives, Interplast Kimya Sanayi Ticaret A.Ş
national supplier
Degirmenköy Fevzipasa Mahallesi Erdogan Sokak No.5, 34586 SILIVRI/ISTANBUL/TURKEY
Emergency Contacts
Emergency Contact
+902127712595
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. If not breathing, give artificial respiration or give oxygen by trained personnel. Get immediate medical attention.
Symptoms: shortness of breath (dyspnea)
Immediately wash skin with soap and plenty of water for at least 15 minutes. Remove contaminated clothing. Get medical attention if symptoms occur. Wash clothing before reuse.
Hold eyelids apart and flush eyes with plenty of water for at least 15 minutes. Have eyes examined and tested by medical personnel
Symptoms: blurry vision, burning sensation, redness, tearing, and vasodilation
Wash out mouth with water provided person is conscious. Never give anything by mouth to an unconscious person. Get medical attention. Do NOT induce vomiting unless directed to do so by medical personnel
Symptoms: gastrointestinal irritation with nausea, vomiting, diarrhea, headache, dizziness, and drowsiness
Immediate Medical Attention
Get immediate medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, foam, dry powder or carbon dioxide.
A solid water stream may be inefficient.
Vapors may cause a flash fire or ignite explosively. Vapors may travel considerable distance to a source of ignition and flash back. Prevent buildup of vapors or gases to explosive concentrations. May form peroxides of unknown stability.
Fight fire from a protected location. Water may be ineffective in fighting the fire. Use water spray to keep fire-exposed containers cool.
Firefighter Protection
Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Keep people away from and upwind of spill/leak. Evacuate personnel to safe areas.
Avoid release to the environment.
Soak up with inert absorbent material. Keep in suitable, closed containers for disposal.
Materials: inert absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid breathing mists or vapors. Do not get in eyes and avoid contact with skin and clothing. Do not taste or swallow. Use only with adequate ventilation. Wash thoroughly after handling. Minimize exposure to air. After opening, purge container with nitrogen before reclosing. Periodically test for peroxide formation on long-term storage. Do not allow to evaporate to near dryness. Do not distill to near dryness. Addition of water or appropriate reducing materials will lessen peroxide formation.
Keep container tightly closed and in a well-ventilated place. Store away from heat and light. Keep away from food, drink and animal feeding stuffs.
Wash thoroughly after handling.
Store away from heat.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation, especially in confined areas. Use explosion-proof electrical/ventilating/lighting/equipment. Ensure that eyewash stations and safety showers are close to the workstation location
Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced
Long sleeved clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions
Under normal conditions of storage and use, hazardous reactions will not occur. Hazardous polymerization will not occur.
Avoid all possible sources of ignition (spark or flame). Do not pressurize, cut, weld, braze, solder, drill, grind or expose containers to heat or sources of ignition. Do not allow vapor to accumulate in low or confined areas.
Oxidizing agents, reducing agent, acid and alkalis, moisture.
Thermal decomposition is highly dependent on conditions. Carbon monoxide, carbon dioxide and other organic compounds will be evolved when this material undergoes combustion or thermal or oxidative degradation. May form explosive peroxides.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1866
- Shipping Name
- FLAMMABLE
- Transport Class
- 3
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ANEX A 016H?
The signal word is danger.
What is the physical form of ANEX A 016H?
ANEX A 016H is a viscous liquid with colorless color.
What is ANEX A 016H used for?
SYNTHETIC LEATHER
What are the hazard statements for ANEX A 016H?
This substance has 5 hazard statements:
- H225: Highly flammable liquid and vapour
- H226: Flammable liquid and vapour
- H315: Causes skin irritation
- H319: Causes serious eye irritation
- H336: May cause drowsiness or dizziness
What is the melting point of ANEX A 016H?
The melting point is 18°C and the boiling point is 80°C.