Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ANEX C1
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
SYNTHETIC LEATHER
Manufacturers & Suppliers
Anex Chemicals and adhesivers, Interplast Kimya Sanayi Ticaret A.Ş
manufacturer
Fevzipasa Mahallesi Erdogan Sokak No:5 Degirmenköy/Silivri ISTANBUL/TURKEY Zip Code:34586
Emergency Contacts
Anex Chemicals and adhesivers, Interplast Kimya Sanayi Ticaret A.Ş
+902127712595
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS06
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ethyl Acetate EC: 205-500-4 | 141-78-6 | 20 - 40% | Yes |
| Toluene diisocyanate EC: 247-722-4 | 26471-62-5 | 0.25 - 0.5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air in case of accidental inhalation of vapours. If breathing is irregular or stopped, administer artificial respiration. Call a physician immediately.
Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes. Wash contaminated clothing before reuse. If skin irritation persists, call a physician.
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician
If swallowed, seek medical advice immediately and show this container or label. Do not induce vomiting without medical advice. Never give anything by mouth to an unconscious person.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO 2, dry chemical, dry sand, alcohol-resistant foam. Water spray. Cool closed containers exposed to fire with water spray..
Water may be ineffective. Do not use a solid water stream as it may scatter and spread fire
Flammable. Risk of ignition. Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Containers may explode when heated..
Firefighter Protection
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid contact with the skin and the eyes. Use personal protective equipment. Remove all sources of ignition. Take precautionary measures against static discharges. Ensure adequate ventilation.
Prevent further leakage or spillage if safe to do so. Should not be released into the environment.
Soak up with inert absorbent material. Keep in suitable, closed containers for disposal.
Materials: inert absorbent material, suitable, closed containers
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid inhaling vapor and/or mists. Avoid contact with skin, eyes and clothing. Extinguish any naked flames. Do not smoke. Remove ignition sources. Avoid sparks. Electrostatic discharge may cause fire. Ensure electrical continuity by bonding and grounding all equipment. Avoid splash filling. Do not use compressed air for filling, discharging or handling operations
Must be stored in a well-ventilated area and keep away from ignition and heat sources. Keep away from aerosols, oxidizing agents and corrosives. The vapor is heavier than air. Beware of accumulation in pits and confined spaces. Store in a segregated and approved area. Keep container in a cool, well-ventilated area. Keep container tightly closed and sealed until ready for use.
Avoid contact with skin, eyes and clothing.
Extinguish any naked flames. Do not smoke. Remove ignition sources. Avoid sparks. Electrostatic discharge may cause fire. Ensure electrical continuity by bonding and grounding all equipment.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation, especially in confined areas. Use explosion-proof electrical/ventilating/lighting/equipment. Ensure that eyewash stations and safety showers are close to the workstation location
Wear appropriate protective gloves
Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166
No protective equipment is needed under normal use conditions.
Wear appropriate protective clothing to prevent skin exposure
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions
None under normal processing.
Incompatible products. Keep away from open flames, hot surfaces sources of ignition, and water vapour
Strong oxidizing agents, Strong acids, Amines, Peroxides
Hydrogen Cyanide, Acetaldehyde, Isocyanate(s)
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1866
- Shipping Name
- RESIN SOLUTION
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ANEX C1?
The signal word is danger.
What is the physical form of ANEX C1?
ANEX C1 is a liquid appearing as colorless to yellow with colorless to yellow color.
What is ANEX C1 used for?
SYNTHETIC LEATHER
What are the hazard statements for ANEX C1?
This substance has 10 hazard statements:
- H225: Highly flammable liquid and vapour.
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H330: Fatal if inhaled.
- H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled.
- H335: May cause respiratory irritation
- H336: May cause drowsiness or dizziness.
- H351: Suspected of causing cancer.
- H412: Harmful to aquatic life with long lasting effects