Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TRIOXYDE D'ANTIMOINE
- Chemical Name
- TRIOXYDE D'ANTIMOINE
Regulatory Identifiers
- CAS Number
- 1309-64-4 Check regulations →
- EC Number
- 215-175-0 Check regulations →
- REACH No.
- 01-2119475613-35-XXXX
Identified Uses
The major use of diantimony trioxide is as flame retardant, opacifier, pigment, intermediate (precursor), degasifier of glass, laboratory chemicals, colouring agents, semiconductor and photovoltaic agent. Restricted to professional users.
Uses advised against
None known.
Manufacturers & Suppliers
SICA AMG Antimony
manufacturer
Rue Géo Lufbéry, BP 70046, 02301 CHAUNY CEDEX
+33 (0)3 23 40 35 30
Emergency Contacts
Anti-poison center
+32 (0) 70 245 245
every day, 24 hours a day
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Antimony trioxide EC: 215-175-0 | 1309-64-4 | 99% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Upon breathing difficulties or irritation of the respiratory tract: Bring the person into fresh air and stay with him/her.
Remove contaminated clothing and shoes immediately. Ensure to wash exposed skin thoroughly with water and soap. Skin cleanser can be used. DO NOT use solvents or thinners. If skin irritation occurs: Get medical advice/attention.
If in eyes: Flush eyes with water or saline water (20-30 °C) for at least 5 minutes. Remove contact lenses. Seek medical assistance and continue flushing during transport.
If the person is conscious, rinse the mouth with water and stay with the person. Never give the person anything to drink. In case of malaise, seek medical advice immediately and bring the safety data sheet or label from the product. Do not induce vomiting, unless recommended by the doctor. Have the person lean forward with head down to avoid inhalation of or choking on vomited material.
Immediate Medical Attention
IF exposed or concerned: Get immediate medical advice/attention.
Medical Treatment
Information to medics: Bring this safety data sheet or the label from this product.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Alcohol-resistant foam, carbon dioxide, powder, water mist.
Waterjets should not be used, since they can spread the fire.
Fire will result in dense smoke. Exposure to combustion products may harm your health.
Closed containers, which are exposed to fire, should be cooled with water.
Firefighter Protection
Wear self-contained breathing apparatus and protective clothing to prevent contact.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid direct contact with spilled substances. Contaminated areas may be slippery.
Avoid discharge to lakes, streams, sewers, etc. In the event of leakage to the surroundings, contact local environmental authorities.
Collect spills carefully. Wherever possible cleaning should be performed with normal cleaning agents. Avoid use of solvents.
Materials: normal cleaning agents
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid direct contact with the product. Avoid contact during pregnancy and while nursing. Smoking, drinking and consumption of food is not allowed in the work area. Avoid contact with skin and eyes. Take a shower at the end of your shift.
Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Dry, cool and well ventilated. Protect from moisture.
Smoking, drinking and consumption of food is not allowed in the work area. Take a shower at the end of your shift.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Do not recirculate outlet air that contain the substances. Apply standard precautions during use of the product. Avoid inhalation of gas or dust. Airborne gas and dust concentrations must be kept at a minimum. Provide efficient mechanical ventilation.
Material: Gloves, Standards: EN374
Type: Safety glasses, Standards: EN166
Type: SL, Class: P3, Colour: White, Standards: EN149. If not possible use suitable respiratory equipment.
Recommended: Safety shoes, Type/Category: II, Standards: EN ISO 20345 / EN ISO 20347
Keep damming materials near the workplace. If possible, collect spillage during work.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable under the conditions, noted in section 7 "Handling and storage".
No data available.
Reaction with hydrogen and release of stibine (gas).
Generation of dust
Strong acids, Reducing agents, Strong bases
The product is not degraded when used as specified in section 1.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TRIOXYDE D'ANTIMOINE?
The signal word is warning.
What is the physical form of TRIOXYDE D'ANTIMOINE?
TRIOXYDE D'ANTIMOINE is a powder with white color.
What is TRIOXYDE D'ANTIMOINE used for?
The major use of diantimony trioxide is as flame retardant, opacifier, pigment, intermediate (precursor), degasifier of glass, laboratory chemicals, colouring agents, semiconductor and photovoltaic agent. Restricted to professional users.
What are the hazard statements for TRIOXYDE D'ANTIMOINE?
This substance has 2 hazard statements:
- H351: Suspected of causing cancer.
- H373: May cause damage to organs through prolonged or repeated exposure. (Lung) (Inhalation)
What is the melting point of TRIOXYDE D'ANTIMOINE?
The melting point is 656 °C and the boiling point is 1425 °C.