Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- DEHCH
- Chemical Name
- Bis(2-ethylhexyl) cyclohexane-1,4-dicarboxylate
Regulatory Identifiers
- CAS Number
- 84731-70-4 Check regulations →
- EC Number
- 283-829-2 Check regulations →
- REACH No.
- 01-2119987572-24-xxxx
Identified Uses
Plasticiser, Ingredient in coatings, inks, adhesives and sealants, Plastics processing, Lubricant additive
Manufacturers & Suppliers
HARKE Chemicals GmbH
national supplier
Xantener Straße 1, D-45479 Mülheim an der Ruhr, Germany
Emergency Contacts
HARKE Chemicals GmbH
+49 (0)208 - 3069 - 0
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Bis(2-ethylhexyl) cyclohexane-1,4-dicarboxylate EC: 283-829-2 | 84731-70-4 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air.
Wash with plenty of soap and water.
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Rinse mouth. Do not induce vomiting. Get medical advice/attention if you feel unwell.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
water spray, alcohol resistant foam, fire extinguishing powder, carbon dioxide (CO2)
water jet
Co-ordinate firefighting measures to the fire surroundings. Fight fire with normal precautions from a reasonable distance.
Firefighter Protection
In case of fire and/or explosion do not breathe fumes. self-contained breathing apparatus (EN 133)
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ventilate affected area. Special danger of slipping by leaking/spilling product. Wear breathing apparatus if exposed to vapours/dust/spray/gases.
Remove from the water surface (e.g. skimming, sucking). Keep away from drains, surface and ground water. Retain contaminated washing water and dispose of it.
Collect spillage. Use of adsorbent materials. Place in appropriate containers for disposal.
Materials: sand, diatomaceous earth, acid binder, universal binder, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from sources of ignition - No smoking. Do not mix with oxidiser. Avoid release to the environment. Do not eat, drink and smoke in work areas. Wash hands after use. Preventive skin protection (barrier creams/ointments) is recommended. Remove contaminated clothing and protective equipment before entering eating areas.
Keep away from food, drink and animal feeding stuffs. Protect against external exposure, such as high temperatures, humidity, UV-radiation/sunlight. Keep only in original container.
Do not eat, drink and smoke in work areas. Wash hands after use. Preventive skin protection (barrier creams/ointments) is recommended. Remove contaminated clothing and protective equipment before entering eating areas.
Keep away from sources of ignition - No smoking.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
General ventilation.
Wear suitable gloves. Chemical protection gloves are suitable, which are tested according to EN 374. Check leak-tightness/impermeability prior to use. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. Material: PVC: polyvinyl chloride (≥ 0,5 mm, >30 minutes), CR: chloroprene (chlorobutadiene) rubber (≥ 0,5 mm, >30 minutes), NBR: acrylonitrile-butadiene rubber (≥ 0,4 mm, >30 minutes).
Wear eye/face protection.
In case of inadequate ventilation wear respiratory protection.
Use appropriate container to avoid environmental contamination. Keep away from drains, surface and ground water.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The material is stable under normal ambient and anticipated storage and handling conditions of temperature and pressure.
This material is not reactive under normal ambient conditions.
No known hazardous reactions.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
oxidisers
Reasonably anticipated hazardous decomposition products produced as a result of use, storage, spill and heating are not known. Hazardous combustion products: see section 5.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for DEHCH?
The signal word is no signal word.
What is the physical form of DEHCH?
DEHCH is a liquid with colourless color. It has characteristic odor.
What is DEHCH used for?
Plasticiser, Ingredient in coatings, inks, adhesives and sealants, Plastics processing, Lubricant additive
What is the melting point of DEHCH?
The melting point is -40.7 °C and the boiling point is 406.4 °C.