Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- AVI SPERSE 890
- Product Form
- Substance
- Product Code
- 20182070
Regulatory Identifiers
- CAS Number
- 222716-38-3 Check regulations →
- EC Number
- 638-743-3 Check regulations →
Identified Uses
Wetting and dispersing additive for filled polyester resin systems, Dispersing agent
Manufacturers & Suppliers
Vertexco N.V.
manufacturer
Industrielaan 104, BE 8930 Menen, België
+32 56 42 30 80
http://www.vertexco.be
Emergency Contacts
Vertexco
+32 476 39 79 49
24h/d 7d/w
Centre Anti-Poisons/ Antigifcentrum c/o Hôpital Militaire Reine Astrid
+32 70 245 245
Centre Anti-Poisons/ Antigifcentrum c/o Hôpital Militaire Reine Astrid
02 264 96 30
National Poisons Information Centre Beaumont Hospital
+353 1 809 2566
Healthcare professionals-24/7
National Poisons Information Centre Beaumont Hospital
+353 1 809 2166
public, 8am - 10pm, 7/7
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Fatty acids, tall-oil, esters with polyethylene glycol mono(hydrogen maleate), compds. with amides from diethylenetriamine and tall-oil fatty acids EC: 638-743-3 | 222716-38-3 | 100% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing. Seek medical attention if ill effect or irritation develops.
Wash skin with plenty of water. Take off contaminated clothing. If skin irritation occurs: Get medical advice/attention.
Symptoms: Causes skin irritation.
In case of eye contact, immediately rinse with clean water for 10-15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Consult an ophtalmologist if irritation persists.
If swallowed, rinse mouth. Do NOT induce vomiting. Call a poison center or a doctor if you feel unwell. If possible show this sheet, if not available show packaging or label.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide (CO2), powder, alcohol-resistant foam, hazy water.
Do not use a heavy water stream.
Making extinguishing agents environment-friendly. Prevent fire fighting water from entering the environment. Provision to contain effluent from fire extinguishing.
Firefighter Protection
Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Remove ignition sources. Keep unprotected persons away. Provide adequate ventilation. Do not get in eyes, on skin, or on clothing.
Avoid release to the environment. Do not allow to enter drains or water courses.
Take up liquid spill into absorbent material. Take up mechanically (sweeping, shovelling) and collect in suitable container for disposal.
Materials: absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Take precautionary measures against static discharges. Ensure good ventilation of the work place. Avoid contact with skin and eyes. Wear personal protective equipment. Do not breathe dust, mist, Aerosols, gas, vapours.
Store in dry, cool, well-ventilated area.
Handle in accordance with good industrial hygiene and safety practice. Take off immediately all contaminated clothing and wash it before reuse. Do not eat, drink or smoke when using this product. Always wash hands after handling the product.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Protect from heat and direct sunlight. Keep away from sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation of the work place. Emergency eye wash fountains and safety showers should be available in the immediate vicinity of any potential exposure.
Chemically resistant protective gloves; Material: Polyvinylchloride (PVC); Permeation: 6 (> 480 minutes); Standard: EN ISO 374
Protective goggles (EN 166)
In case of inadequate ventilation wear respiratory protection. Vapours or aerosols : Wear respiratory protection.
Wear suitable protective clothing
Avoid release to the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
The product is non-reactive under normal conditions of use, storage and transport.
Vapours may form explosive mixture with air.
None under recommended storage and handling conditions (see section 7).
No data available.
Under normal conditions of storage and use, hazardous decomposition products should not be produced. In case of fire: Toxic fumes, nitrogen oxides, carbon oxides (CO, CO2), fume.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for AVI SPERSE 890?
The signal word is warning.
What is the physical form of AVI SPERSE 890?
AVI SPERSE 890 is a liquid appearing as liquid with brown color. It has characteristic odor.
What is the solubility of AVI SPERSE 890?
Water: Not miscible
What is AVI SPERSE 890 used for?
Wetting and dispersing additive for filled polyester resin systems, Dispersing agent
What are the hazard statements for AVI SPERSE 890?
This substance has 1 hazard statement:
- H315: Causes skin irritation.
What is the melting point of AVI SPERSE 890?
The melting point is No data available and the boiling point is No data available.