Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- PFINDER 890
- Product Code
- 11890200
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Cleaning agent/ Cleaner
Manufacturers & Suppliers
Pfinder KG
manufacturer
Rudolf-Diesel-Str. 14, D-71032 Böblingen
+49 (0)7031 2701-0
Emergency Contacts
Vergiftungs-Informations-Zentrale Universitätsklinikum Freiburg
+49 (0)761 19240
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air. If required, provide artificial respiration. Keep patient warm. Consult doctor if symptoms persist. In case of unconsciousness place patient stably in side position for transportation. In case of inhalation of aerosols remove the casualty into fresh air and seek medical advice.
Immediately wash with water and soap and rinse thoroughly. If skin irritation continues, consult a doctor.
Rinse opened eye for several minutes under running water. Then consult a doctor.
Do not induce vomiting; call for medical help immediately. Rinse out mouth.
Immediate Medical Attention
Call for medical help immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, dry powder, carbon dioxide, water spray jet
Can form explosive gas-air mixtures. Vapours are heavier than air and spread on ground. Vapours spread along the ground and distant ignition is possible. Containers: Effect of heat may cause rise of pressure -danger of bursting
As possible remove the container from the source of fire. Avoid afflux of combustible material.
Firefighter Protection
Wear self-contained respiratory protective device. Wear fully protective suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away.
Embank large quantities and pump with an ex-proof apparatus in containers.
Inform respective authorities in case of seepage into water course or sewage system. In case of seepage into the ground inform responsible authorities.
Absorb with liquid-binding material
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from heat and direct sunlight. Ensure good ventilation/exhaustion at the workplace. Open and handle receptacle with care. Prevent formation of aerosols. Avoid splashes or spray in enclosed areas. Use solvent-proof equipment. Use only in well ventilated areas. Ensure good interior ventilation, especially at floor level. Tightly reclose container after each use. Keep away from sources of ignition - No smoking. Avoid contact with eyes and skin.
Store in a cool location. Store in cool, dry conditions in well sealed receptacles. Protect from heat and direct sunlight. Store receptacle in a well ventilated area.
Avoid contact with eyes and skin.
Keep ignition sources away - Do not smoke. Protect against electrostatic charges. Do not spray onto a naked flame or any incandescent material. Emergency cooling must be available in case of nearby fire.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No dangerous reactions known. Forms explosive gas mixture with air.
Flames, sparks, heat.
Strong oxidizing agents
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1993
- Shipping Name
- FLAMMABLE LIQUID, N.O.S. (ACETONE, ISOPROPANOL (ISOPROPYL ALCOHOL))
- Transport Class
- 3
- Packing Group
- II
Warning: Flammable liquids.
Warning: Flammable liquids.
Warning: Flammable liquids.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for PFINDER 890?
The signal word is danger.
What is the physical form of PFINDER 890?
PFINDER 890 is a liquid with colourless, clear color. It has solvent-like odor.
What is PFINDER 890 used for?
Cleaning agent/ Cleaner
What are the hazard statements for PFINDER 890?
This substance has 3 hazard statements:
- H225: Highly flammable liquid and vapour.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
What is the melting point of PFINDER 890?
The melting point is < -90,0 °C and the boiling point is 56,0 °C.