NextSDS Logo
Safety Data Sheet EN

MagniF

CAS 1332-37-2
EC 215-570-8

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
MagniF
Synonyms
MagniF10, MagniF 10F, MagniF 25, MagniF 50, MagniF 150, Magnetite, Magnetite 20E, Magnetite 30E

Regulatory Identifiers

CAS Number
1332-37-2 Check regulations →
EC Number
215-570-8 Check regulations →
REACH No.
Exempt

Identified Uses

High density filler, para-magnetic

Manufacturers & Suppliers

L

LKAB Minerals AB

manufacturer

Box 952, SE-971 28 LULEÅ, Sweden

Emergency Contacts

LKAB Minerals AB

+46 771 760 400

09.00 – 16.00 (local business hours)

LKAB Minerals Asia Pacific Ltd

+852 2827 3000

09.00 – 16.00 (local business hours)

LKAB Minerals BV

+31 168 388500

09.00 – 16.00 (local business hours)

LKAB Minerals Inc

+1 513 322 5530

09.00 – 16.00 (local business hours)

LKAB Minerals GmbH

+49 201 45060

09.00 – 16.00 (local business hours)

LKAB Minerals Ltd

+44 1724 277411

09.00 – 16.00 (local business hours)

LKAB Minerals Ltd

+44 1332 673131

09.00 – 16.00 (local business hours)

LKAB Minerals Oy

+358 17 2660160

09.00 – 16.00 (local business hours)

LKAB Minerals Tianjin

+86 22 2435 1706

09.00 – 16.00 (local business hours)

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
Magnif EC: 215-570-8 1332-37-2 90% No

REACH Registration number: Exempt

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move the exposed person to fresh air at once. Get medical attention if any discomfort continues.

Symptoms: No specific symptoms noted.

Skin contact

Wash skin with soap and water. Get medical attention if irritation persists after washing.

Symptoms: No specific symptoms noted.

Eye contact

Make sure to remove any contact lenses from the eyes before rinsing. Rinse eye with water immediately. Get medical attention if any discomfort continues.

Symptoms: No specific symptoms noted.

Ingestion

Rinse mouth thoroughly. Get medical attention if any discomfort continues.

Symptoms: No specific symptoms noted.

Immediate Medical Attention

Get medical attention if any discomfort continues.

Medical Treatment

Treat symptomatically

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use fire extinguishing media appropriate for surrounding materials.

Instructions

No specific fire fighting procedures given

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Follow precautions for safe handling described in this safety data sheet

Environmental

The product should not be dumped in nature but collected and delivered according to agreement with the local authorities.

Cleanup methods

Remove spillage with vacuum cleaner. If not possible, collect spillage with shovel, broom or the like.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid handling which leads to dust formation. Avoid inhalation of high concentrations of dust. Observe occupational exposure limits and minimise the risk of inhalation of dust.

Storage

Store in tightly closed original container in a dry, cool and well-ventilated place. Keep in original container.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Provide adequate ventilation. Observe occupational exposure limits and minimise the risk of inhalation of dust.

Hands

No specific hand protection noted, but gloves may still be advisable.

Eyes

Wear dust resistant safety goggles where this is a danger of eye contact.

Respiratory

No specific recommendation made, but respiratory protection must be used if the general level exceeds the recommended occupational exposure limit. Wear dust masks in dusty areas.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Granular, powder, dust
Physical State Data
solid
State Under Standard Conditions
---
Appearance
Granular, powder, dust
Colour
Black
Colour Intensity
---
Form
---
Odor
Odourless
Odor Threshold
---
Ph
---
Melting Point
1400 - 1600 °C
Boiling Point
---
Flash Point
---
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
---
Vapor Density
---
Relative Density
5.0
Bulk Density
---
Density
---
Flammability
---
Upper Explosive Limit
---
Lower Explosive Limit
---
Explosive Limits
---
Auto Ignition Temperature
---
Decomposition Temperature
---
Solubility
---
Partition Coefficient
---
Solubility In Water
Insoluble
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal temperature conditions.

Reactivity

No specific reactivity hazards associated with this product.

Hazardous reactions

Not relevant

Avoid

No specific conditions are likely to result in a hazardous situation

Incompatible

No specific, or groups, of materials are likely to react to produce a hazardous situation.

Decomposition

None under normal circumstances

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is MagniF known by?

MagniF is also known as: MagniF10, MagniF 10F, MagniF 25, MagniF 50, MagniF 150, Magnetite, Magnetite 20E, Magnetite 30E

What is the hazard signal word for MagniF?

The signal word is no signal word.

What is the physical form of MagniF?

MagniF is a granular, powder, dust appearing as granular, powder, dust with black color. It has odourless odor.

What is MagniF used for?

High density filler, para-magnetic

What is the melting point of MagniF?

The melting point is 1400 - 1600 °C .