Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- IMPRANIL DLP-R DISPERSION
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Binder for coating materials
Manufacturers & Suppliers
Bayer MaterialScience AG
manufacturer
HSEQ-PRC (Product Safety), 51368 Leverkusen
+49 214 30 25026
Emergency Contacts
Sicherheitszentrale Bayer
+49 214 30 99300
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 5-chloro-2-methyl-3(2H)-isothiazolone / 2-methyl-3(2H)-isothiazolone (3:1) | 55965-84-9 | 0.0015% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
seek medical advice
Symptoms: irritation of the respiratory tract
Wash off immediately with soap and plenty of water. Consult a doctor in the event of a skin reaction.
Symptoms: skin reaction
Hold the eyes open and rinse with preferably lukewarm water for a sufficiently long period of time (at least 10 minutes). Contact an ophthalmologist.
DO NOT induce the patient to vomit, medical advice is required.
Immediate Medical Attention
In case of irritation of the respiratory tract seek medical advice. Consult a doctor in the event of a skin reaction. Contact an ophthalmologist. Medical advice is required if swallowed.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide (CO2), Foam, extinguishing powder, in cases of larger fires, water spray should be used.
High volume water jet
Burning releases carbon monoxide, carbon dioxide, oxides of nitrogen and traces of hydrogen cyanide. In the event of fire and/or explosion do not breathe fumes.
In the event of fire and/or explosion do not breathe fumes.
Firefighter Protection
Firemen must wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow to escape into waterways, wastewater or soil.
Take up with absorbent for chemicals or, if necessary with dry sand and store in closed containers.
Materials: absorbent for chemicals, dry sand
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
When handling observe the usual precautionary measures for chemicals. Avoid contact with the skin and the eyes.
Keep container tightly closed in a dry and well-ventilated place. Further information on the storage conditions which must be observed to preserve quality can be found in our product information sheet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Suitable materials for safety gloves; EN 374-3: Fluorinated rubber - FKM: thickness >=0,4mm; breakthrough time >=480min. Butyl rubber - IIR: thickness >=0,5mm; breakthrough time >=480min. Nitrile rubber - NBR: thickness >=0,35mm; breakthrough time >=480min. Recommendation: contaminated gloves should be disposed of.
Wear eye/face protection.
Respiratory equipment required during spraying.
Wear suitable protective clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No hazardous decomposition products when used as directed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for IMPRANIL DLP-R DISPERSION?
The signal word is no signal word.
What is the physical form of IMPRANIL DLP-R DISPERSION?
IMPRANIL DLP-R DISPERSION is a liquid with white color. It has slight inherent odour odor.
What is IMPRANIL DLP-R DISPERSION used for?
Binder for coating materials
What is the melting point of IMPRANIL DLP-R DISPERSION?
The melting point is ca. 0 °C and the boiling point is ca. 100 °C.