Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- PTFE Fluoroplastic Dispersion DISP 30
- Product Code
- D14783090
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Coatings
Uses advised against
For industrial use only. Do not use or resell Chemours™ materials in medical applications involving implantation in the human body or contact with internal body fluids or tissues unless agreed to by Seller in a written agreement covering such use.
Manufacturers & Suppliers
The Chemours Company FC, LLC
manufacturer
1007 Market Street Wilmington, DE 19801 United States of America (USA)
1-844-773-CHEM
Emergency Contacts
Medical emergency
1-866-595-1473
Medical emergency
1-302-773-2000
Transport emergency
+1-800-424-9300
Transport emergency
+1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2,6,8-Trimethyl-4-nonyloxypolyethyleneoxyethanol | 60828-78-6 | 1 - 5% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, remove to fresh air. Get medical attention if symptoms occur.
Symptoms: respiratory tract irritation, Lung edema
In case of contact, immediately flush skin with plenty of water. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Symptoms: Local irritation
In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. If easy to do, remove contact lens, if worn. Get medical attention.
Symptoms: Causes serious eye irritation, Impairment of vision
If swallowed, DO NOT induce vomiting. Get medical attention if symptoms occur. Rinse mouth thoroughly with water.
Immediate Medical Attention
Get medical attention.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, Alcohol-resistant foam, Carbon dioxide (CO2), Dry chemical
None known.
Exposure to combustion products may be a hazard to health.
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Use water spray to cool unopened containers. Remove undamaged containers from fire area if it is safe to do so. Evacuate area.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus. Use personal protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective equipment. Follow safe handling advice (see section 7) and personal protective equipment recommendations (see section 8).
For large spills, provide diking or other appropriate containment to keep material from spreading. If diked material can be pumped, store recovered material in appropriate container.
Avoid release to the environment. Prevent further leakage or spillage if safe to do so. Prevent spreading over a wide area (e.g., by containment or oil barriers). Retain and dispose of contaminated wash water.
Soak up with inert absorbent material. Clean up remaining materials from spill with suitable absorbent.
Materials: inert absorbent material, suitable absorbent
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not breathe decomposition products. Do not get on skin or clothing. Avoid inhalation of vapor or mist. Do not swallow. Do not get in eyes. Wash skin thoroughly after handling. Handle in accordance with good industrial hygiene and safety practice, based on the results of the workplace exposure assessment. Take care to prevent spills, waste and minimize release to the environment.
Keep in properly labeled containers. Store in accordance with the particular national regulations. Do not freeze.
Wash skin thoroughly after handling. Handle in accordance with good industrial hygiene and safety practice
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Not classified as a reactivity hazard.
Hazardous decomposition products will be formed at elevated temperatures.
None known.
None.
Hydrogen fluoride, Carbonyl difluoride, Carbon dioxide, Carbon monoxide
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
Ecotoxicity
Persistence and degradability
Bioaccumulative potential
Mobility in soil
Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of in accordance with local regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for PTFE Fluoroplastic Dispersion DISP 30?
The signal word is warning.
What is the physical form of PTFE Fluoroplastic Dispersion DISP 30?
PTFE Fluoroplastic Dispersion DISP 30 is a liquid appearing as liquid, dispersion with milky color. It has slight, ammoniacal odor.
What is PTFE Fluoroplastic Dispersion DISP 30 used for?
Coatings
What are the hazard statements for PTFE Fluoroplastic Dispersion DISP 30?
This substance has 1 hazard statement:
- H319: Causes serious eye irritation.
What is the melting point of PTFE Fluoroplastic Dispersion DISP 30?
The melting point is 32 °F / 0 °C and the boiling point is 212 °F / 100 °C.