Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Reofos® 35
- Chemical Name
- Phenol, isopropylated, phosphate (3:1) [Triphenyl phosphate > 11%]
Regulatory Identifiers
- CAS Number
- N/A
- EC Number
- 273-066-3 Check regulations →
Identified Uses
Flame Retardant, Antiwear lubricant additive
Uses advised against
Restricted to professional users.
Manufacturers & Suppliers
Chemtura Manufacturing UK Limited
manufacturer
Tenax Road, Trafford Park, Manchester, United Kingdom, M17 1WT
+44 161 875 3800
Emergency Contacts
Emergency Contact
+44 (0)208 762 8322
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Phenol, isopropylated, phosphate (3:1) [Triphenyl phosphate > 11%] EC: 273-066-3 | 68937-41-7 | 100% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. Get medical attention.
Wash skin thoroughly with soap and water for at least 15 minutes. If skin irritation occurs: Get medical advice/ attention.
Hold eyelids apart and flush eyes with plenty of water for at least 15 minutes. Get medical attention.
If conscious, make the victim drink the following: Drink 1 or 2 glasses of water. Get medical attention immediately.
Immediate Medical Attention
Get medical attention.
Medical Treatment
The first aid procedure should be established in consultation with the doctor responsible for industrial medicine.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
All conventional media are suitable.
Thermal decomposition can lead to release of irritating gases and vapours.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus. Wear personal protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid release to the environment.
soak up with non-combustible absorbent material, and transfer to a container for disposal according to local / national regulations
Materials: non-combustible absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid prolonged contact. Avoid formation of aerosol. Do not use in areas without adequate ventilation. Avoid repeated exposure. Use personal protective equipment as required.
Keep in a dry, cool and well-ventilated place. Keep container tightly closed. Stable under normal conditions.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Local ventilation is needed in the presence of airborne mists. Adequate general ventilation is recommended when handling to control airborne levels. Use mechanical ventilation for general area control.
Impervious butyl rubber gloves
Safety glasses with side-shields conforming to EN166. Wear face-shield and protective suit for abnormal processing problems.
When using this product at elevated temperatures, wear a respirator with a vapour filter.
To protect against splashes from pouring: Chemical resistant apron, impervious clothing, Rubber or plastic boots. For personal hygiene purposes, use adequate clothing to prevent skin contact.
Avoid release to the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
None reasonably foreseeable.
No dangerous reaction known under conditions of normal use.
Will not occur.
None known.
None known.
Carbon oxides, Oxides of phosphorus
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (Phenol, isopropylated, phosphate (3:1) [Triphenyl phosphate > 11%])
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Reofos® 35?
The signal word is warning.
What is the physical form of Reofos® 35?
Reofos® 35 is a clearliquid appearing as clearliquid with colourless color. It has odourless odor.
What is Reofos® 35 used for?
Flame Retardant, Antiwear lubricant additive
What are the hazard statements for Reofos® 35?
This substance has 4 hazard statements:
- H317: May cause an allergic skin reaction.
- H361: Suspected of damaging fertility or the unborn child if swallowed.
- H373: May cause damage to organs through prolonged or repeated exposure if swallowed.
- H411: Toxic to aquatic life with long lasting effects.