AL 1100 1000g

If inhaled, remove to fresh air. Get medical attention if symptoms occur.

Wash with water and soap as a precaution. Get medical attention if symptoms occur.

Flush eyes with water as a precaution. Get medical attention if irritation develops and persists.

If swallowed, DO NOT induce vomiting. Get medical attention if symptoms occur. Rinse mouth thoroughly with water.

Water spray, Alcohol-resistant foam, Carbon dioxide (CO2), Dry chemical

None known.

Exposure to combustion products may be a hazard to health.

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Use water spray to cool unopened containers. Remove undamaged containers from fire area if it is safe to do so. Evacuate area.

Follow safe handling advice (see section 7) and personal protective equipment recommendations (see section 8).

For large spills, provide dyking or other appropriate containment to keep material from spreading. If dyked material can be pumped, store recovered material in appropriate container.

Avoid release to the environment. Prevent further leakage or spillage if safe to do so. Retain and dispose of contaminated wash water. Local authorities should be advised if significant spillages cannot be contained.

Soak up with inert absorbent material. Clean up remaining materials from spill with suitable absorbent.

Materials: inert absorbent material

Handle in accordance with good industrial hygiene and safety practice, based on the results of the workplace exposure assessment. Take care to prevent spills, waste and minimize release to the environment.

Keep in properly labelled containers. Store in accordance with the particular national regulations.

If exposure to chemical is likely during typical use, provide eye flushing systems and safety showers close to the working place. When using do not eat, drink or smoke. Wash contaminated clothing before re-use.

Ensure adequate ventilation, especially in confined areas. Minimize workplace exposure concentrations.

Material: Nitrile rubber; Break through time: >= 240 min; Glove thickness: 0.38 mm; Remarks: Choose gloves to protect hands against chemicals depending on the concentration and quantity of the hazardous substance and specific to place of work. For special applications, we recommend clarifying the resistance to chemicals of the aforementioned protective gloves with the glove manufacturer.

Please follow all applicable local/national requirements when selecting protective measures for a specific workplace. Wear the following personal protective equipment: Safety glasses. Always wear eye protection when the potential for inadvertent eye contact with the product cannot be excluded. Equipment should conform to I.S. EN 166

If adequate local exhaust ventilation is not available or exposure assessment demonstrates exposures outside the recommended guidelines, use respiratory protection. Equipment should conform to I.S. EN 143. Filter type: Particulates type (P)

Skin should be washed after contact.

Stable under normal conditions.

Not classified as a reactivity hazard.

Can react with strong oxidizing agents.

None known.

Oxidizing agents

No hazardous decomposition products are known.