Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Methyl methacrylate (stabilised) for synthesis
- Product Code
- 8.00590
Regulatory Identifiers
- CAS Number
- 80-62-6 Check regulations →
- REACH No.
- A registration number is not available for this substance as the substance or its uses are exempted from registration or the annual tonnage does not require a registration.
Identified Uses
Chemical for synthesis
Manufacturers & Suppliers
Merck Life Science N.V.
distributor
Haarlerbergweg 21 A, 1101 CH AMSTERDAM, NETHERLANDS
+31 078 620-5411
http://www.sigmaaldrich.com
Emergency Contacts
CHEMTREC
+(31)-858880596
Alarmnummer
112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| methyl methacrylate EC: 201-297-1 | 80-62-6 | 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
After inhalation: fresh air.
Take off immediately all contaminated clothing. Rinse skin with water/ shower. Consult a physician.
After eye contact: rinse out with plenty of water. Remove contact lenses.
After swallowing: immediately make victim drink water (two glasses at most). Consult a physician.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide (CO2) Foam Dry powder
For this substance/mixture no limitations of extinguishing agents are given.
Carbon oxides. Combustible. Pay attention to flashback. Vapors are heavier than air and may spread along floors. Development of hazardous combustion gases or vapours possible in the event of fire. Forms explosive mixtures with air at ambient temperatures.
Remove container from danger zone and cool with water.
Firefighter Protection
Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate the danger area, observe emergency procedures, consult an expert.
Do not let product enter drains.
Collect, bind, and pump off spills. Take up with liquid-absorbent material (e.g. Chemizorb®). Clean up affected area.
Materials: liquid-absorbent material (e.g. Chemizorb®)
Related Products
Similar products with comparable safety profiles
Methyl methacrylate (stabilised) for synthesis
CAS: 80-62-6
Methyl methacrylate, stabilised
CAS: 80-62-6
Methyl methacrylate
CAS: 80-62-6
Methyl acrylate
CAS: 96-33-3
Methyl acrylate
CAS: 96-33-3
Methyl acrylate
CAS: 96-33-3
Acrylonitrile (stabilised with hydroquinone monomethyl ether) for synthesis
CAS: 107-13-1
Styrene (stabilised) for synthesis
CAS: 100-42-5
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from open flames, hot surfaces and sources of ignition. Take precautionary measures against static discharge.
Keep container tightly closed in a dry and well-ventilated place. Keep away from heat and sources of ignition.
Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance.
Keep away from open flames, hot surfaces and sources of ignition. Take precautionary measures against static discharge.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Material: butyl-rubber, Minimum layer thickness: 0,7 mm, Break through time: 60 min, Material tested: Butoject® (KCL 898). When dissolving in or mixing with other substances and under conditions deviating from those stated in EN 16523-1 please contact the supplier of CE-approved gloves.
Safety glasses, tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Recommended Filter type: Filter A (acc. to DIN 3181) for vapours of organic compounds. The entrepreneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer.
Flame retardant antistatic protective clothing.
Do not let product enter drains. Risk of explosion.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable under standard ambient conditions (room temperature). Contains the following stabilizer(s): hydroquinone monomethyl ether (0,01 %)
Vapors may form explosive mixture with air.
Risk of ignition or formation of inflammable gases or vapours with: Strong oxidizing agents Exothermic reaction with: Amines polymerisation initiators Ammonia Risk of explosion with: Aldehydes
Heat, flames and sparks. Heat. Contamination Keep away from direct sunlight. Heat, flames and sparks. Extremes of temperature and direct sunlight. Warming.
rubber, various plastics, Strong oxidizing agents
In the event of fire: see section 5
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1247
- Shipping Name
- METHYL METHACRYLATE MONOMER, STABILIZED
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Methyl methacrylate (stabilised) for synthesis?
The signal word is danger.
What is the physical form of Methyl methacrylate (stabilised) for synthesis?
Methyl methacrylate (stabilised) for synthesis is a liquid with colorless color. It has pungent odor.
What is Methyl methacrylate (stabilised) for synthesis used for?
Chemical for synthesis
What are the hazard statements for Methyl methacrylate (stabilised) for synthesis?
This substance has 4 hazard statements:
- H225: Highly flammable liquid and vapor.
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H335: May cause respiratory irritation.
What is the melting point of Methyl methacrylate (stabilised) for synthesis?
The melting point is ca.-48 °C and the boiling point is 100,36 °C.