Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Methyl methacrylate, stabilized
- Product Code
- AC127140000; AC127140010; AC127140025; AC127140100; AC127140250
- Chemical Name
- Methyl methacrylate
- Synonyms
- MMA
Regulatory Identifiers
- CAS Number
- 80-62-6 Check regulations →
Identified Uses
Laboratory chemicals.
Uses advised against
Food, drug, pesticide or biocidal product use.
Manufacturers & Suppliers
Fisher Scientific Company
manufacturer
One Reagent Lane, Fair Lawn, NJ 07410
(201) 796-7100
Acros Organics
manufacturer
One Reagent Lane, Fair Lawn, NJ 07410
Emergency Contacts
Emergency Contact
001-800-227-6701
Emergency Contact
+32 14 57 52 11
Emergency Contact
001-201-796-7100
Emergency Contact
+32 14 57 52 99
CHEMTREC
001-800-424-9300
CHEMTREC
001-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Methyl methacrylate, stabilized
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Methyl methacrylate | 80-62-6 | 95% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove from exposure, lie down. Remove to fresh air. If not breathing, give artificial respiration.
Symptoms: Inhalation of high vapor concentrations may cause symptoms like headache, dizziness, tiredness, nausea and vomiting
Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes.
Symptoms: May cause allergic skin reaction. Symptoms of allergic reaction may include rash, itching, swelling, tingling of the hands and feet.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.
Do NOT induce vomiting. Clean mouth with water.
Symptoms: nausea and vomiting
Immediate Medical Attention
Get medical attention. In the case of skin irritation or allergic reactions see a physician.
Medical Treatment
Treat symptomatically
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide (CO₂). Foam. Dry chemical. Water mist may be used to cool closed containers. Water mist may be used to cool closed containers.
No information available
Flammable. Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Containers may explode when heated. Vapors may form explosive mixtures with air.
Firefighter Protection
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not flush into surface water or sanitary sewer system. See Section 12 for additional Ecological Information.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Keep in suitable, closed containers for disposal.
Materials: sand, silica gel, acid binder, universal binder, sawdust
Related Products
Similar products with comparable safety profiles
Methyl methacrylate, stabilised
CAS: 80-62-6
Methyl methacrylate (stabilised) for synthesis
CAS: 80-62-6
Methyl methacrylate (stabilised) for synthesis
CAS: 80-62-6
Methyl methacrylate
CAS: 80-62-6
Methyl acrylate
CAS: 96-33-3
Methyl acrylate
CAS: 96-33-3
Methyl acrylate
CAS: 96-33-3
Ethyl methacrylate
CAS: 97-63-2
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes. Do not breathe mist/vapors/spray. Handle product only in closed system or provide appropriate exhaust ventilation. Use spark-proof tools and explosion-proof equipment. Use only non-sparking tools. Keep away from open flames, hot surfaces and sources of ignition. To avoid ignition of vapors by static electricity discharge, all metal parts of the equipment must be grounded. Take precautionary measures against static discharges.
Keep in a dry, cool and well-ventilated place. Keep container tightly closed. Keep away from heat, sparks and flame. Refrigerator/flammables. Inhibitor levels should be maintained.
Avoid contact with skin and eyes.
Keep away from open flames, hot surfaces and sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Yes
None under normal processing. Hazardous polymerization may occur upon depletion of inhibitor.
Keep away from open flames, hot surfaces and sources of ignition. Excess heat. Exposure to light. Incompatible products.
Acids, Bases, Amines, Halogens, Peroxides, Reducing Agent
Carbon monoxide (CO), Carbon dioxide (CO₂)
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1247
- Shipping Name
- METHYL METHACRYLATE MONOMER, STABILIZED
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Methyl methacrylate, stabilized known by?
Methyl methacrylate, stabilized is also known as: MMA
What is the hazard signal word for Methyl methacrylate, stabilized?
The signal word is danger.
What is the physical form of Methyl methacrylate, stabilized?
Methyl methacrylate, stabilized is a liquid with colorless color. It has strong odor.
What is Methyl methacrylate, stabilized used for?
Laboratory chemicals.
What are the hazard statements for Methyl methacrylate, stabilized?
This substance has 5 hazard statements:
- H225: Highly flammable liquid and vapor
- H315: Causes skin irritation
- H317: May cause an allergic skin reaction
- H319: Causes serious eye irritation
- H335: May cause respiratory irritation
What is the melting point of Methyl methacrylate, stabilized?
The melting point is -48 °C / -54.4 °F and the boiling point is 100 °C / 212 °F.