Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Respondol ATF 3/3
- Product Form
- Mixture
- Product Code
- FNC 05 21
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- 6RE1-K080-000M-1S4C
Identified Uses
Firefighting foam concentrate
Uses advised against
No additional information available
Manufacturers & Suppliers
ANGUS FIRE Ltd
manufacturer
Station Road, LA2 7NA Bentham, United Kingdom
+44(0) 1524 264000
http://www.angusfire.co.uk
Emergency Contacts
ANGUS FIRE Ltd
+44(0) 1524 264000
Monday to Friday 8:30am - 4:30pm GMT
National Poisons Information Service (Birmingham Centre) City Hospital
0344 892 0111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 1-butoxy-2-propanol EC: 225-878-4 | 5131-66-8 | 4 - 10% | Yes |
| Sulfuric acid, mono-C8-10 (even numbered)-alkyl esters, sodium salts EC: 939-332-4 | 85338-42-7 | 1 - 4% | Yes |
| Sodium laureth sulphate EC: 500-234-8 | 68891-38-3 | 1 - 4% | Yes |
| 1,2-propanediol EC: 200-338-0 | 57-55-6 | 4 - 10% | No |
| 1-dodecanol EC: 203-982-0 | 112-53-8 | 0.1 - 1% | Yes |
| 1-tetradecanol EC: 204-000-3 | 112-72-1 | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Allow affected person to breathe fresh air. Allow the victim to rest.
Wash with plenty of water. Wash contaminated clothing before reuse. If skin irritation occurs: Get medical advice/attention.
Symptoms: Causes skin irritation.
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
Symptoms: Causes serious eye irritation.
Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention.
Immediate Medical Attention
Obtain emergency medical attention. If skin irritation occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
No specific measures are necessary. This product is a fire extinguishing medium.
Not applicable.
No fire hazard.
Not applicable.
Firefighter Protection
Not applicable.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate unnecessary personnel.
Prevent entry to sewers and public waters.
Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect spillage.
Materials: inert solids, such as clay or diatomaceous earth
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes. Wear recommended personal protective equipment. Read and follow manufacturer's recommendations. Handle in accordance with good industrial hygiene and safety procedures. Read and follow the Safety Data Sheet (SDS) before use.
Store in original container. Keep container tightly closed. Store at temperatures not exceeding 60°C (140°F) (intermittent). Protect from sunlight. Protect from freezing. Keep/Store away from incompatible materials.
Wash hands thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation. Follow the exposure limits given on this material safety data sheet.
Wear protective gloves (Recommended: Protective index 6, corresponding > 480 minutes of permeation time according to EN 374): nitrile rubber (NBR) - 0.2 mm coating thickness
Sealed safety goggles
In case of insufficient ventilation, wear suitable respiratory equipment (recommended filter type A2/P2)
Wear suitable protective clothing. Wear suitable protective clothing
Contain spills. Prevent releases. Observe national regulations on emissions. Ensure all national/local regulations are observed.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
The product is stable and non reactive under normal conditions of use, storage and transport.
No dangerous reactions known under normal conditions of use.
Incompatible materials. Extremely high or low temperatures.
Alkali metals. Oxidizing agent. Water reactive substances.
Carbon oxides. Sulphur oxides. Nitrogen oxides (NOx). Sodium oxides.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Respondol ATF 3/3?
The signal word is warning.
What is the physical form of Respondol ATF 3/3?
Respondol ATF 3/3 is a liquid with yellow. color. It has characteristic. odor.
What is the solubility of Respondol ATF 3/3?
Not available
What is Respondol ATF 3/3 used for?
Firefighting foam concentrate
What are the hazard statements for Respondol ATF 3/3?
This substance has 2 hazard statements:
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
What is the melting point of Respondol ATF 3/3?
The melting point is Not available and the boiling point is Not available.