Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ATF Dexron II-D
- Product Form
- Mixture
- Product Code
- 02.30.20
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Main use category : Industrial use, Professional use, Consumer use Use of the substance/mixture : Transmission oil
Uses advised against
No additional information available
Manufacturers & Suppliers
Kroon-Oil B.V.
manufacturer
Dollegoorweg 15, NL 7602 EC Almelo, Netherlands
0031 (0)546 81 81 65
Emergency Contacts
National Poisons Information Centre Beaumont Hospital
+353 1 809 2566
24/7
National Poisons Information Centre Beaumont Hospital
+353 1 809 2166
8am - 10pm, 7/7
National Poisons Information Service (Cardiff Centre) University Hospital Llandough
0344 892 0111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Highly refined mineral oils and additives.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Dibutyl [bis[(2-ethylhexyl)oxy]phosphinothioyl]thio]succinate EC: 270-220-1 | 68413-48-9 | 1% | Yes |
| Benzenamine, N-phenyl-, reaction products with 2,4,4-trimethylpentene EC: 270-128-1 | 68411-46-1 | 0.3% | Yes |
Notes
The highly refined mineral oil contains <3% (w/w) DMSOextract, according to IP346.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing.
Symptoms: Although no appropriate human or animal health effects data are known to exist, this material is expected to be an inhalation hazard.
Wash skin with plenty of water.
Symptoms: None under normal conditions.
Rinse eyes with water as a precaution.
Symptoms: None under normal conditions.
Do NOT induce vomiting. Call a poison center or a doctor if you feel unwell.
Symptoms: None under normal conditions.
Immediate Medical Attention
Treat symptomatically.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray. Dry powder. Foam. Carbon dioxide.
Do not use a heavy water stream.
Fire hazard: No fire hazard. Explosion hazard: No direct explosion hazard.
Fight fire from safe distance and protected location. Do not enter fire area without proper protective equipment, including respiratory protection.
Firefighter Protection
Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Stop leak if safe to do so. Ventilate spillage area. Evacuate unnecessary personnel.
Notify authorities if product enters sewers or public waters.
Absorb spillage to prevent material damage.
Materials: absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Provide good ventilation in process area to prevent formation of vapour.
Keep container closed when not in use. Keep in a cool, well-ventilated place away from heat.
Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation of the work station.
Protective gloves. Type: Reusable gloves, Material: Nitrile rubber (NBR), Permeation: 6 (> 480 minutes), Thickness: ≥0.35 mm, Standard: EN ISO 374.
Safety glasses. Type: Safety glasses, Field of application: Droplet, Characteristics: clear, Standard: EN 166.
In case of insufficient ventilation, wear suitable respiratory equipment.
Wear suitable protective clothing.
Avoid release to the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
The product is non-reactive under normal conditions of use, storage and transport.
No dangerous reactions known under normal conditions of use. Reacts violently with (strong) oxidizers.
None under recommended storage and handling conditions (see section 7).
No additional information available
No decomposition if stored normally.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ATF Dexron II-D?
The signal word is no signal word.
What is the physical form of ATF Dexron II-D?
ATF Dexron II-D is a liquid with red. color. It has characteristic. odor.
What is the solubility of ATF Dexron II-D?
Water: Insoluble / Slightly miscible
What is ATF Dexron II-D used for?
Main use category : Industrial use, Professional use, Consumer use Use of the substance/mixture : Transmission oil
What is the melting point of ATF Dexron II-D?
The melting point is Not applicable and the boiling point is Not available.