Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Kryo 20
- Product Code
- LZB 116, LZB 216, LZB 316
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Heat transfer fluids, Industrial use, Professional uses / Public domain
Manufacturers & Suppliers
Lauda Dr. Wobser GmbH & Co. KG
manufacturer
Pfarrstraße 41/43, 97922 Lauda-Königshofen
+49 (0)9343-503-0
http://www.lauda.de
Emergency Contacts
GIZ-Nord, Göttingen, Germany
+49 551-19240
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Polydimethylsiloxane | --- | 95 - 100% | No |
| Dodecamethylcyclohexasiloxane EC: 208-762-8 | 540-97-6 | 1% | No |
Contains the following substances of very high concern (SVHC) which are included in the Candidate List according to Article 59 of REACH: Dodecamethylcyclohexasiloxane (PBT, vPvB)
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air. Seek medical treatment in case of troubles.
Remove residues with soap and water. In case of skin irritation, consult a physician. Protect skin by using skin protective cream.
Immediately flush eyes with plenty of flowing water for 10 to 15 minutes holding eyelids apart. Remove contact lenses, if present and easy to do. Continue rinsing. Consult an eye specialist in the event of irritation.
Symptoms: Due to the formation of an oil film on the eye ball sight may be reversibly clouded.
Rinse mouth thoroughly with water. Never give anything by mouth to an unconscious person. Do not induce vomiting. Seek medical attention.
Immediate Medical Attention
Seek medical attention. Treat symptomatically.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray jet, alcohol resistant foam, extinguishing powder, carbon dioxide, sand
Full water jet
Combustible. May form dangerous gases and vapours in case of fire.
Firefighter Protection
Wear self-contained breathing apparatus. Wear suitable protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Provide adequate ventilation. Take off contaminated clothing and wash it before reuse. Avoid contact with the substance. Do not breathe mist/vapours/spray.
Do not allow to penetrate into soil, waterbodies or drains.
Soak up with absorbent materials
Materials: sand, siliceus earth, acid- or universal binder
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes. Wear appropriate protective equipment. Do not breathe mist/vapours/spray. Take off contaminated clothing and wash it before reuse.
Keep container tightly closed in a cool, well-ventilated place.
Wash hands before breaks and after work. When using do not eat, drink or smoke.
Keep away from sources of ignition and heat.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
When aerosols and vapours form: Withdraw by suction.
Protective gloves according to EN 374. Glove material: butyl caoutchouc (butyl rubber), nitrile rubber. Breakthrough time: >480 min. Observe glove manufacturer’s instructions concerning penetrability and breakthrough time.
Tightly sealed goggles according to EN 166.
When aerosols and vapours form: Use combination filter type A/P according to EN 14387.
Wear suitable protective clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Product is stable under normal storage conditions.
refer to 10.3
No dangerous reactions are known.
No data available
No data available
Measurements taken at temperatures exceeding 150 °C have revealed that a small quantity of formaldehyde splits off through oxidative decomposition. Thermal decomposition: No data available
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Kryo 20?
The signal word is no signal word.
What is the physical form of Kryo 20?
Kryo 20 is a liquid appearing as liquid with varying, depends on colouring color. It has odourless odor.
What is Kryo 20 used for?
Heat transfer fluids, Industrial use, Professional uses / Public domain