Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Kryo 90
- Product Code
- LZB 128, LZB 228, LZB 328
Regulatory Identifiers
- CAS Number
- 63148-62-9 Check regulations →
Identified Uses
Heat transfer fluids, Industrial use, Professional uses / Public domain
Manufacturers & Suppliers
Lauda Dr. Wobser GmbH & Co. KG
manufacturer
Pfarrstraße 41/43, 97922 Lauda-Königshofen, Germany
+49 (0)9343-503-0
http://www.lauda.de
Emergency Contacts
GIZ-Nord, Göttingen
+49 551-19240
CONSULTANK Lutz Harder GmbH (Contract QUALI003)
+49 (0)178-4337434
CONSULTANK Lutz Harder GmbH (Contract QUALI003)
01149 178 4337434
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Polydimethylsiloxane | 63148-62-9 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air. Seek medical treatment in case of troubles.
Remove residues with soap and water. In case of skin reactions, consult a physician.
Symptoms: Prolonged/repetitive skin contact may cause skin defattening or dermatitis.
Immediately flush eyes with plenty of flowing water for 10 to 15 minutes holding eyelids apart. Remove contact lenses, if present and easy to do. Continue rinsing. In case of eye irritation consult an ophthalmologist.
Symptoms: Can lead to eye ailments, however without permanent damage.
Do not induce vomiting. Immediately get medical attention.
Symptoms: When swallowed and vomited immediately, aspiration into the lungs may occur resulting in chemical pneumonia or suffocation.
Immediate Medical Attention
Immediately get medical attention.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
water fog, alcohol resistant foam, extinguishing powder, carbon dioxide (CO2).
High power water jet
Flammable liquid and vapour. With air, vapours form potentially explosive mixtures, which are heavier than air. May form dangerous gases and vapours in case of fire.
Use fine water spray to cool endangered containers.
Firefighter Protection
Wear self-contained positive pressure breathing apparatus and full firefighting protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Keep unprotected people away. Do not breathe vapours. Provide fresh air. Avoid contact with skin and eyes. Remove all sources of ignition.
Protect environment at risk.
Soak up with absorbent materials
Materials: sand, siliceus earth, acid- or universal binder
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not breathe vapours. Avoid contact with skin and eyes.
Keep container tightly closed. Provide solvent resistant flooring.
Smoking and welding strictly forbidden. Avoid open flames. Keep away from sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide good ventilation and/or an exhaust system in the work area.
Protective gloves according to EN 374. Glove material: Butyl caoutchouc (butyl rubber)-Layer thickness: 0,7 mm. Breakthrough time: >480 min. Observe glove manufacturer's instructions concerning penetrability and breakthrough time.
Tightly sealed goggles according to EN 166
Respiratory protection in case of aerosol or vapour formation. Use filter type A (= against vapours of organic substances) according to EN 14387. (boiling temperature): >65 °C
flame retardant protective clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Product is stable under normal storage conditions.
Flammable liquid and vapour. Vapours can form explosive mixtures with air.
Do not expose to high temperature. Danger of bursting and explosion.
Warmness
oxidizing agents, Acids, alkalis
May form dangerous gases and vapours in case of fire. In case of fire may be liberated: Formaldehyde, carbon monoxide and carbon dioxide. Thermal decomposition: no data available
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1993
- Shipping Name
- FLAMMABLE LIQUID, N.O.S. (Polydimethylsiloxane)
- Transport Class
- 3
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Kryo 90?
The signal word is warning.
What is the physical form of Kryo 90?
Kryo 90 is a liquid appearing as clear with clear color. It has odourless up to mild odor.
What is Kryo 90 used for?
Heat transfer fluids, Industrial use, Professional uses / Public domain
What are the hazard statements for Kryo 90?
This substance has 1 hazard statement:
- H226: Flammable liquid and vapour.
What is the melting point of Kryo 90?
The melting point is no data available and the boiling point is no data available.