Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TRANS-1,2-CYCLOHEXANEDIOL
- Product Code
- CB7256019
- Chemical Name
- TRANS-1,2-CYCLOHEXANEDIOL
- Synonyms
- trans-1,2-Cyclohexanediol,trans-cyclohexane-1,2-diol
Regulatory Identifiers
- CAS Number
- 1460-57-7 Check regulations →
- EC Number
- 215-956-6 Check regulations →
Identified Uses
For R&D use only. Not for medicinal, household or other use.
Manufacturers & Suppliers
Chemicalbook
Building 1, Huihuang International, Shangdi 10th Street, Haidian District, Beijing
010-86108875
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| TRANS-1,2-CYCLOHEXANEDIOL EC: 215-956-6 | 1460-57-7 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
If breathed in, move person into fresh air. If not breathing, give artificial respiration.
Wash off with soap and plenty of water.
Flush eyes with water as a precaution.
Never give anything by mouth to an unconscious person. Rinse mouth with water.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Carbon oxides
Firefighter Protection
Wear self-contained breathing apparatus for firefighting if necessary.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
No special environmental precautions required.
Sweep up and shovel.
Materials: Keep in suitable, closed containers for disposal.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
For precautions see section 2.2.
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
General industrial hygiene practice.
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of Regulation (EU) 2016/425 and the standard EN 374 derived from it. Full contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 min Material tested: Dermatril? (KCL 740 / Aldrich Z677272, Size M) Splash contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 min Material tested: Dermatril? (KCL 740 / Aldrich Z677272, Size M) data source: KCL GmbH, D-36124 Eichenzell, phone +49 (0)6659 87300, e-mail sales@kcl.de, test method: EN374 If used in solution, or mixed with other substances, and under conditions which differ from EN 374, contact the supplier of the CE approved gloves. This recommendation is advisory only and must be evaluated by an industrial hygienist and safety officer familiar with the specific situation of anticipated use by our customers. It should not be construed as offering an approval for any specific use scenario.
Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Respiratory protection is not required. Where protection from nuisance levels of dusts are desired, use type N95 (US) or type P1 (EN 143) dust masks. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).
Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place. The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.
No special environmental precautions required.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
No data available
No data available
No data available
Strong oxidizing agents
Hazardous decomposition products formed under fire conditions. - Carbon oxides Other decomposition products - No data available
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- Shipping Name
- Not dangerous goods
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is TRANS-1,2-CYCLOHEXANEDIOL known by?
TRANS-1,2-CYCLOHEXANEDIOL is also known as: trans-1,2-Cyclohexanediol,trans-cyclohexane-1,2-diol
What is the hazard signal word for TRANS-1,2-CYCLOHEXANEDIOL?
The signal word is warning.
What is the physical form of TRANS-1,2-CYCLOHEXANEDIOL?
TRANS-1,2-CYCLOHEXANEDIOL is a solid appearing as beige crystalline . It has no data available odor.
What is the solubility of TRANS-1,2-CYCLOHEXANEDIOL?
Soluble in chloroform and methanol.
What is TRANS-1,2-CYCLOHEXANEDIOL used for?
For R&D use only. Not for medicinal, household or other use.
What are the hazard statements for TRANS-1,2-CYCLOHEXANEDIOL?
This substance has 3 hazard statements:
- H315: Causes skin irritation
- H319: Causes serious eye irritation
- H335: May cause respiratory irritation
What is the melting point of TRANS-1,2-CYCLOHEXANEDIOL?
The melting point is 101 - 104 °C and the boiling point is 117 °C.