NextSDS Logo
Safety Data Sheet EN

Kaolin Nr. 0040, weiß

CAS 1332-58-7
EC 310-194-1

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Kaolin Nr. 0040, weiß
Chemical Name
Hydrated aluminium silicate
Synonyms
China clay

Regulatory Identifiers

CAS Number
1332-58-7 Check regulations →
EC Number
310-194-1 Check regulations →
REACH No.
Exempted in accordance with Annex V.7 of Regulation (EC) 1907/2006

Identified Uses

Ceramics (sanitaryware, floor tiles, wall tiles, roof tiles, tiles; porcelain, tableware, refractories, etc.), Enamels, Glass, Fillers, Deposit sealing, Paint, Plastic & Rubber, Adhesives and Sealant, Building material & Cement, Fertilisers & Agricultural products

Uses advised against

There is no use advised against

Manufacturers & Suppliers

W

Witgert GmbH & Co. KG

manufacturer

Arno-Witgert-Str. 1, 56414 Herschbach/OT Wahnscheid, Germany

0049 (0)6435/9223-0

Emergency Contacts

European Emergency N°

112

Witgert GmbH & Co. KG

0049 (0)6435/9223-0

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type uvcb

The purity of the product is 100 % w/w.

Chemical Name CAS Number Concentration Hazardous
Kaolin --- --- No
quartz-fine fraction EC: 238-878-4 14808-60-7 1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Movement of the exposed individual from the area to fresh air is recommended.

Skin contact

No special first aid measures necessary.

Eye contact

Rinse under water for at least one minute and seek medical attention if irritation persists.

Ingestion

No first aid measure required.

Immediate Medical Attention

No need for immediate medical attention; follow the advises given in section 4.1

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

No specific extinguishing media is needed.

Unsuitable media

No restriction on the extinguishing media to be used.

Specific hazards

None. The material is not flammable and it does not lead to hazardous thermal decomposition products.

Instructions

No specific fire-fighting protection is required.

Firefighter Protection

No specific fire-fighting protection is required.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Ensure adequate ventilation. Keep dust levels to a minimum. Keep unprotected persons away. Avoid contact with skin, eyes, and personal clothing. Avoid inhalation of dust. Take care of wet product on floor, which presents a slip hazard.

Environmental

No special environmental measures are necessary.

Cleanup methods

Avoid dry sweeping and use water spraying or vacuum cleaning systems (with high-efficiency particulate air filter) to prevent airborne dust generation.

Materials: water spraying or vacuum cleaning systems (with high-efficiency particulate air filter)

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Keep dust levels to a minimum. Minimize dust generation. Provide appropriate exhaust ventilation at places where airborne dust is generated. In case of insufficient ventilation, wear suitable respiratory protective equipment. Handle packaged products carefully to prevent accidental bursting.

Storage

Keep containers closed and store packaged products so as to prevent accidental bursting. Minimise airborne dust generation and prevent wind dispersal during loading and unloading.

Hygiene

Good personal and housekeeping practices (i.e. regular cleaning with suitable cleaning devices), no drinking, eating and smoking in the work areas. Remove contaminated clothing and protective equipment before entering eating areas. Shower and change clothes at end of work shift. Do not wear contaminated clothing at home.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Minimise airborne dust generation. Use process enclosures, local exhaust ventilation or other engineering controls to keep airborne levels below specified exposure limits. If user operations generate dust, fumes or mist, use ventilation to keep exposure to airborne particles below the exposure limit. Apply organisational measures e.g. by isolating personnel from dusty areas.

Hands

For hands, appropriate protection (e.g. PVC, neoprene or natural rubber gloves) is recommended for workers who suffer from dermatitis or sensitive skin. Wash hands at the end of each work session.

Eyes

Wear safety glasses with side-shields, or tight-fitting full-vision goggles in circumstances where there is a risk of penetrative eye injuries. Do not wear contact lenses.

Respiratory

Local ventilation to control airborne dust levels below occupational exposure limits is recommended. In case of prolonged exposure to airborne dust concentrations wear a respiratory protective equipment that complies with the requirements of European and national legislation. The use of a suitable particle filter mask type FFP1, FFP2 or FFP3 is recommended. See EN 143: 2000 (Respiratory Protective devices – Particle filters) and EN149: 2001 (Respiratory protective devices - Filtering half masks to protect against particles).

Skin/Body

For skin, normal work clothes are appropriate.

Environmental

All ventilation systems should be filtered before discharge to atmosphere. Avoid wind dispersal. Contain the spillage.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
solid (bulk, lumps, pellets, granulate or powder)
Physical State Data
solid
State Under Standard Conditions
---
Appearance
---
Colour
white
Colour Intensity
---
Form
---
Odor
odourless
Odor Threshold
---
Ph
6.2 (0.12% solids in water suspension)
Melting Point
> 450 °C
Boiling Point
not applicable
Flash Point
not applicable
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
not applicable
Vapor Pressure
not applicable
Vapor Density
---
Relative Density
2.6 g/cm³
Bulk Density
---
Density
---
Flammability
non flammable
Upper Explosive Limit
do not apply to solids
Lower Explosive Limit
do not apply to solids
Explosive Limits
---
Auto Ignition Temperature
do not apply to solids
Decomposition Temperature
not applicable
Solubility
---
Partition Coefficient
not applicable
Solubility In Water
<1 mg/L at 20°C
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
do not apply to solids
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Kaolin is chemically stable.

Reactivity

Inert, not reactive.

Hazardous reactions

No hazardous reaction.

Avoid

None.

Incompatible

None.

Decomposition

None.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

ADR

Avoid any release of dust during transportation, by using air-tight tanks for powders and covered trucks for pebbles.

IMDG

Avoid any release of dust during transportation, by using air-tight tanks for powders and covered trucks for pebbles.

IATA

Avoid any release of dust during transportation, by using air-tight tanks for powders and covered trucks for pebbles.

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is Kaolin Nr. 0040, weiß known by?

Kaolin Nr. 0040, weiß is also known as: China clay

What is the hazard signal word for Kaolin Nr. 0040, weiß?

The signal word is no signal word.

What is the physical form of Kaolin Nr. 0040, weiß?

Kaolin Nr. 0040, weiß is a solid (bulk, lumps, pellets, granulate or powder) with white color. It has odourless odor.

What is Kaolin Nr. 0040, weiß used for?

Ceramics (sanitaryware, floor tiles, wall tiles, roof tiles, tiles; porcelain, tableware, refractories, etc.), Enamels, Glass, Fillers, Deposit sealing, Paint, Plastic & Rubber, Adhesives and Sealant, Building material & Cement, Fertilisers & Agricultural products

What is the melting point of Kaolin Nr. 0040, weiß?

The melting point is > 450 °C and the boiling point is not applicable.