Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Kaolin KDG PO
- Chemical Name
- Hydrated aluminium silicate
- Synonyms
- China clay
Regulatory Identifiers
- CAS Number
- 1332-58-7 Check regulations →
- EC Number
- 310-194-1 Check regulations →
- REACH No.
- Exempted in accordance with Annex V.7 of Regulation (EC) 1907/2006
Identified Uses
Ceramics (sanitaryware, floor tiles, wall tiles, roof tiles, tiles; porcelain, tableware, refractories, etc.), Enamels, Glass, Fillers, Deposit sealing, Paint, Plastic & Rubber, Adhesives and Sealant, Building material & Cement, Agricultural products and Fertilizers
Uses advised against
Animal feed industry, Cosmetics, Application in food chain
Manufacturers & Suppliers
Sibelco Deutschland GmbH
manufacturer
Sälzerstraße 20, 56235 Ransbach-Baumbach, Germany
+49 2623 968-2000
http://www.sibelco.com
Emergency Contacts
European Emergency N°
112
National Poison Centre
+49 228 19240
Sibelco Deutschland GmbH
+49 2623 968-2000
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Kaolin is a UVCB substance sub-type 4. The purity of the product is 100 % w/w.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Kaolin | --- | --- | No |
| quartz-fine fraction EC: 238-878-4 | 14808-60-7 | 1% | Yes |
Notes
No M Factor assigned. No SCL assigned.
First Aid Measures
Emergency procedures for chemical exposure incidents
Movement of the exposed individual from the area to fresh air is recommended.
No special first aid measures necessary.
Rinse under water for at least one minute and seek medical attention if irritation persists.
No first aid measure required.
Immediate Medical Attention
No need for immediate medical attention; follow the advises given in section 4.1
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
No specific extinguishing media is needed.
No restriction on the extinguishing media to be used.
None. The material is not flammable and it does not lead to hazardous thermal decomposition products.
Firefighter Protection
No specific fire-fighting protection is required.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation. Keep dust levels to a minimum. Keep unprotected persons away. Avoid contact with skin, eyes, and personal clothing. Avoid inhalation of dust. Take care of wet product on floor, which presents a slip hazard.
No special environmental measures are necessary.
Avoid dry sweeping and use water spraying or vacuum cleaning systems (with high-efficiency particulate air filter) to prevent airborne dust generation.
Materials: water spraying or vacuum cleaning systems (with high-efficiency particulate air filter)
Related Products
Similar products with comparable safety profiles
Calcined Kaolin, Chamotte
CAS: 92704-41-1
KAOLIN LIGHT BP
CAS: 1332-58-7
Potassium hydroxide, pellets Ph. Eur.
CAS: 1310-58-3
Ballclays and China clays in powder form
---
Potassium carbonate
CAS: 584-08-7
Molsiv Adsorbents 4A-DG 1/16
---
Potassium carbonate ≥98 %
CAS: 584-08-7
OMACIDE IPBC 10 DPG
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep dust levels to a minimum. Minimize dust generation. Handle packaged products carefully to prevent accidental bursting. In case of insufficient ventilation, wear suitable respiratory protective equipment.
Keep containers closed and store packaged products so as to prevent accidental bursting. Minimise airborne dust generation and prevent wind dispersal during loading and unloading.
Good personal and housekeeping practices (i.e. regular cleaning with suitable cleaning devices), no drinking, eating and smoking in the work areas. Remove contaminated clothing and protective equipment before entering eating areas. Shower and change clothes at end of work shift. Do not wear contaminated clothing at home.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Minimise airborne dust generation. Use process enclosures, local exhaust ventilation or other engineering controls to keep airborne levels below specified exposure limits. If user operations generate dust, fumes or mist, use ventilation to keep exposure to airborne particles below the exposure limit. Apply organisational measures e.g. by isolating personnel from dusty areas.
For hands, appropriate protection (e.g. PVC, neoprene or natural rubber gloves) is recommended for workers who suffer from dermatitis or sensitive skin.
Wear safety glasses with side-shields, or tight-fitting full-vision goggles in circumstances where there is a risk of penetrative eye injuries. Do not wear contact lenses.
Local ventilation to control airborne dust levels below occupational exposure limits is recommended. In case of prolonged exposure to airborne dust concentrations wear a respiratory protective equipment that complies with the requirements of European and national legislation. The use of a suitable particle filter mask type FFP1, FFP2 or FFP3 is recommended. See EN 143: 2000 (Respiratory Protective devices – Particle filters) and EN149: 2001 (Respiratory protective devices - Filtering half masks to protect against particles).
For skin, normal work clothes are appropriate.
All ventilation systems should be filtered before discharge to atmosphere. Avoid wind dispersal. Contain the spillage.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Kaolin is chemically stable.
Inert, not reactive.
No hazardous reaction.
None.
None.
None.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Wastes should be handled in accordance with local and national regulations. Dispose of waste in such a way to avoid dust generation. Where possible, recycling should be preferred to disposal.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not relevant. No UN-number.
- Shipping Name
- Not relevant.
- Transport Class
- Not classified
- Packing Group
- Not applicable.
Avoid any release of dust during transportation, by using air-tight tanks for powders and covered trucks for pebbles.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Kaolin is exempted from REACH registration in accordance with Annex V.7 of Regulation (EC) 1907/2006.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Kaolin KDG PO known by?
Kaolin KDG PO is also known as: China clay
What is the hazard signal word for Kaolin KDG PO?
The signal word is no signal word.
What is the physical form of Kaolin KDG PO?
Kaolin KDG PO is a solid (bulk, lumps, pellets, granulates or powder) with white color. It has odourless odor.
What is Kaolin KDG PO used for?
Ceramics (sanitaryware, floor tiles, wall tiles, roof tiles, tiles; porcelain, tableware, refractories, etc.), Enamels, Glass, Fillers, Deposit sealing, Paint, Plastic & Rubber, Adhesives and Sealant, Building material & Cement, Agricultural products and Fertilizers
What is the melting point of Kaolin KDG PO?
The melting point is > 450 °C and the boiling point is not applicable (solid with a melting point > 450 °C).