Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Meliseptol Foam pure / fresh
- Product Form
- Mixture
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Rapid disinfectant for small surfaces / for medical devices
Uses advised against
No additional information available
Manufacturers & Suppliers
B. Braun Medical AG
manufacturer
Seesatz 17, CH-6204 Sempach - Switzerland
+41 (0) 58 / 258 50 00
B. Braun Medical Ltd.
distributor
Thomcliffe Park Estate, Brookdale Road, Sheffield S35 2PW, UK - Medical Information Department
+44 (0)114 225 9000
Emergency Contacts
GBK GmbH
+49 - (0) 6132 - 84463
24h - 7d/w - 365d/a
NHS 111
111
NHS 24
111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing. If you feel unwell, seek medical advice.
After contact with skin, wash immediately with plenty of water. Get medical advice if skin irritation persists.
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Consult an eye specialist.
Symptoms: Serious damage to eyes.
Immediately give plenty of water. Rinse mouth. Never give anything by mouth to an unconscious person. Call a physician immediately. Do not induce vomiting without medical advice.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray. Dry powder. Alcohol resistant foam. Carbon dioxide.
high volume water jet.
Flammable liquid and vapour. Product is not explosive. Explosive vapour/air mixtures may be formed.
Cool endangered containers with water spray jet. Eliminate all ignition sources if safe to do so. Fight fire from safe distance and protected location.
Firefighter Protection
Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ventilate spillage area. No open flames, no sparks, and no smoking. Avoid breathing vapours. Avoid contact with skin and eyes.
Do not allow to enter drains or water courses. Avoid release to the environment.
Take up liquid spill into absorbent material, e.g.: sand, earth, vermiculite.
Materials: sand, earth, vermiculite
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Flammable vapours may accumulate in the container. Use explosion-proof equipment. Wear personal protective equipment. Use only outdoors or in a well-ventilated area. Avoid breathing vapours. Avoid contact with skin and eyes.
Keep container tightly closed in a dry, cool and well-ventilated place.
Do not eat, drink or smoke when using this product. Always wash hands after handling the product.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation of the work station.
This recommendation refers exclusively to the chemical compatibility and the lab test conforming to EN 374 carried out under lab conditions. Requirements can vary as a function of the use. Therefore it is necessary to adhere additionally to the recommendations given by the manufacturer of protective gloves. Type: Chemically resistant protective gloves, Material: Nitrile rubber, Permeation: 6 (>480 minutes), Thickness: 0,4 mm, Standard: EN ISO 374
Eyewash bottle with clean water (EN 15154). Protective goggles (EN 166) for liquid splashes, Standard: EN 166.
No personal breathing protective equipment is normally required. In the event of insufficient ventilation: Respiratory protective device with a gas filter, Type A - High-boiling (>65 °C) organic compounds, Standard: EN 14387.
Avoid release to the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Flammable liquid and vapour.
Reacts with: alkaline earth metals. alkali metals. oxidizing materials.
Vapour/air-mixtures are explosive at intense warming. Heating can release vapours which can be ignited.
alkali metals. alkaline earth metals. Oxidizing agent.
No hazardous decomposition products known. Fire may produce: Carbon oxides (CO, CO2). Nitrous gas. Chlorine compounds.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1274
- Shipping Name
- N-PROPANOL (PROPYL ALCOHOL, NORMAL) (SOLUTION)
- Transport Class
- 3
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Meliseptol Foam pure / fresh?
The signal word is danger.
What is the physical form of Meliseptol Foam pure / fresh?
Meliseptol Foam pure / fresh is a liquid appearing as liquid. with colourless. color. It has characteristic. odor.
What is the solubility of Meliseptol Foam pure / fresh?
Miscible with water.
What is Meliseptol Foam pure / fresh used for?
Rapid disinfectant for small surfaces / for medical devices
What are the hazard statements for Meliseptol Foam pure / fresh?
This substance has 2 hazard statements:
- H226: Flammable liquid and vapour.
- H318: Causes serious eye damage.
What is the melting point of Meliseptol Foam pure / fresh?
The melting point is < -127 °C and the boiling point is 97 °C.