Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MOTIP LEAK DETECTOR 400 ML
- Product Code
- 090406
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
SU21 Consumer uses: Private households / general public / consumers, SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen)
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
European Aerosols B.V.
manufacturer
Wolfraamweg 2, NL-8471 XC Wolvega, The Netherlands
+31 (0)561 694400
Emergency Contacts
Emergency Contact
+31 (0)561-694400
09:00h - 17:00h
NPIS National Poisons Information Centre
+44 0344 892 0111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Alcohols, C9-C16, ethoxylated EC: 619-252-3 | 97043-91-9 | 3 - 5% | Yes |
| nitrogen EC: 231-783-9 | 7727-37-9 | 2.5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Generally the product does not irritate the skin.
Rinse opened eye for several minutes under running water. Then consult a doctor.
Drink plenty of water and provide fresh air. Call for a doctor immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use fire extinguishing methods suitable to surrounding conditions.
During heating or in case of fire poisonous gases are produced.
Firefighter Protection
Mouth respiratory protective device.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Mount respiratory protective device. Wear protective equipment. Keep unprotected persons away.
Do not allow to enter sewers/ surface or ground water.
Use neutralising agent.
Materials: neutralising agent
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation/exhaustion at the workplace.
Keep container tightly sealed. Observe official regulations on storing packagings with pressurised containers.
Do not spray onto a naked flame or any incandescent material.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see section 7.
Protective gloves. Material of gloves: Butyl rubber, BR. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. Penetration time of glove material: Butyl rubber gloves with a thickness of 0.4 mm are resistant to: Acetone: 480 min, Butyl acetate: 60 min, Ethyl acetate: 170 min, Xylene: 42 min. Butyl rubber gloves with a thickness of 0.4 mm are solvent resistant for 42-480 minutes. As protective measure, we recommend that users and responsible persons for work safety assume solvent resistance length of 42 minutes. Considering the data in section 3 of this SDS, one can assume longer resistance length in particular cases.
Tightly sealed goggles
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device. Filter A2/P3
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
No dangerous reactions known.
No further relevant information available.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.2
Warning: Gases.
Warning: Gases.
Warning: Gases.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MOTIP LEAK DETECTOR 400 ML?
The signal word is danger.
What is the physical form of MOTIP LEAK DETECTOR 400 ML?
MOTIP LEAK DETECTOR 400 ML is a aerosol appearing as clear with clear color. It has mild odor.
What is MOTIP LEAK DETECTOR 400 ML used for?
SU21 Consumer uses: Private households / general public / consumers, SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen)
What are the hazard statements for MOTIP LEAK DETECTOR 400 ML?
This substance has 2 hazard statements:
- H229: Pressurised container: May burst if heated.
- H318: Causes serious eye damage.
What is the melting point of MOTIP LEAK DETECTOR 400 ML?
The melting point is Undetermined. and the boiling point is 100 °C (212 °F).