Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Aerosol 1K Fill-in befüllt mit 200 ml Imron Fleet Line Industry NC Topcoat
- Product Form
- Aerosol
- Product Code
- MBA23/872+200ml IFI NC TC
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
SU3 Industrial uses: Uses of substances as such or in preparations at industrial sites, SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen), painting
Uses advised against
No further relevant information available.
Emergency Contacts
National Poisons Information Service, Birmingham
844 892 0111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| dimethyl ether EC: 204-065-8 | 115-10-6 | 50 - 100% | Yes |
| acetone EC: 200-662-2 | 67-64-1 | 10 - 25% | Yes |
| propane EC: 200-827-9 | 74-98-6 | 5 - 10% | Yes |
| butane (containing ≤ 0,1 % butadiene (203-450-8)) EC: 203-448-7 | 106-97-8 | 2.5 - 5% | Yes |
| isobutane (containing ≤ 0,1 % butadiene (203-450-8)) EC: 200-857-2 | 75-28-5 | 1 - 2.5% | Yes |
| ethyl acetate EC: 205-500-4 | 141-78-6 | 1 - 2.5% | Yes |
| n-butyl acetate EC: 204-658-1 | 123-86-4 | 1 - 2.5% | Yes |
| 2-methoxy-1-methylethyl acetate EC: 203-603-9 | 108-65-6 | 1 - 2.5% | Yes |
| nitrocellulose with water(not less than 25% water, by mass) | 9004-70-0 | 1 - 2.5% | Yes |
| Calcium carbonate EC: 215-279-6 | 1317-65-3 | 1 - 2.5% | No |
| ethanol EC: 200-578-6 | 64-17-5 | 1% | Yes |
| xylene, mixture of isomers EC: 215-535-7 | 1330-20-7 | 1% | Yes |
| Carbon black EC: 215-609-9 | 1333-86-4 | 1% | No |
| butyl glycollate EC: 230-991-7 | 7397-62-8 | 1% | Yes |
| butan-1-ol EC: 200-751-6 | 71-36-3 | 1% | Yes |
| ethylbenzene EC: 202-849-4 | 100-41-4 | 1% | Yes |
| maleic anhydride EC: 203-571-6 | 108-31-6 | 0.1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Generally the product does not irritate the skin.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
If symptoms persist consult doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Cool container whit water
No further relevant information available.
Firefighter Protection
No special measures required.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away.
Do not allow to enter sewers/ surface or ground water.
Dispose contaminated material as waste according to section 13.
Related Products
Similar products with comparable safety profiles
Aerosol 1K Fill-in befüllt mit 200 ml Lack Govaere Brugge
---
Aerosol 1K Fill in
---
Aerosol 2K Fill In + 100ml Lack 2K Epoxy Primer black (SPR64607)
---
Aerosol 2K Fill In + 100ml 2K Epoxy Primer beige
---
Aerosol 2K Fill In + 100ml Lack 2K Epoxy Primer yellow (SPR64132)
---
SprayMax 1K Fill-in 680071 befüllt mit 100ml des Lackmaterials 1K TOUCH UP SAL DOOSAN KAIROS ORANGE
---
Aerosol 2K Fill In + 100ml Lack 2K BHS CAT BLACK
---
Aerosol 2K Fill In + 100ml Lack 2K BHS CAT Yellow
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from heat and direct sunlight. Ensure good ventilation/exhaustion at the workplace.
Observe official regulations on storing packagings with pressurised containers.
Keep ignition sources away - Do not smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see section 7.
Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Penetration time of glove material: Gloves must be changed after every contamination. The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed. For the permanent contact of a maximum of 15 minutes gloves made of the following materials are suitable: butyl rubber, 0,7mm
Safety glasses. Tightly sealed goggles
When workers are facing concentrations above the exposure limit they must use appropriate certified respirators. Half mask with combination filter, class A1P2 minimum, or breathing mask with outer air supply.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
No dangerous reactions known.
No further relevant information available.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2
- Packing Group
- Void
Warning: Gases.
SW1 Protected from sources of heat. SW22 For AEROSOLS with a maximum capacity of 1 litre: Category A. For AEROSOLS with a capacity above 1 litre: Category B. For WASTE AEROSOLS: Category C, Clear of living quarters. SG69 For AEROSOLS with a maximum capacity of 1 litre: Segregation as for class 9. Stow "separated from" class 1 except for division 1.4. For AEROSOLS with a capacity above 1 litre: Segregation as for the appropriate subdivision of class 2. For WASTE AEROSOLS: Segregation as for the appropriate subdivision of class 2.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Aerosol 1K Fill-in befüllt mit 200 ml Imron Fleet Line Industry NC Topcoat?
The signal word is danger.
What is the physical form of Aerosol 1K Fill-in befüllt mit 200 ml Imron Fleet Line Industry NC Topcoat?
Aerosol 1K Fill-in befüllt mit 200 ml Imron Fleet Line Industry NC Topcoat is a aerosol appearing as aerosol with according to product specification color. It has characteristic odor.
What is Aerosol 1K Fill-in befüllt mit 200 ml Imron Fleet Line Industry NC Topcoat used for?
SU3 Industrial uses: Uses of substances as such or in preparations at industrial sites, SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen), painting
What are the hazard statements for Aerosol 1K Fill-in befüllt mit 200 ml Imron Fleet Line Industry NC Topcoat?
This substance has 4 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
What is the melting point of Aerosol 1K Fill-in befüllt mit 200 ml Imron Fleet Line Industry NC Topcoat?
The melting point is Undetermined. and the boiling point is -44 °C.