Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ZWALUW LEAKDETECTOR SPRAY 300ML
- Product Code
- 12009735
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Construction chemicals
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
DEN BRAVEN
manufacturer
Denariusstraat 11, 4903 RC Oosterhout, The Netherlands
http://www.denbraven.com
Emergency Contacts
DEN BRAVEN
+31 (0)162-491000
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints. Take affected persons into fresh air and keep quiet.
Rinse with warm water. Immediately wash with water and soap and rinse thoroughly. Immediately remove any clothing soiled by the product.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Do not induce vomiting; call for medical help immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Fire-extinguishing powder, Carbon dioxide, Foam
Can form explosive gas-air mixtures.
Cool endangered receptacles with water spray.
Firefighter Protection
Wear self-contained respiratory protective device.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away. Ensure adequate ventilation. Keep away from ignition sources.
No special measures required.
Absorb with liquid-binding material
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes.
Observe official regulations on storing packagings with pressurised containers. Protect from heat and direct sunlight.
Keep ignition sources away - Do not smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Material of gloves (EN 374) Penetration time of glove material The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
(EN 166)
Not necessary if room is well-ventilated.
(EN 13034-6) Protective work clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
No dangerous reactions known.
No further relevant information available.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2
- Packing Group
- Void
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ZWALUW LEAKDETECTOR SPRAY 300ML?
The signal word is warning.
What is the physical form of ZWALUW LEAKDETECTOR SPRAY 300ML?
ZWALUW LEAKDETECTOR SPRAY 300ML is a aerosol appearing as colourless with colourless color. It has characteristic odor.
What is ZWALUW LEAKDETECTOR SPRAY 300ML used for?
Construction chemicals
What are the hazard statements for ZWALUW LEAKDETECTOR SPRAY 300ML?
This substance has 1 hazard statement:
- H229: Pressurised container: May burst if heated.
What is the melting point of ZWALUW LEAKDETECTOR SPRAY 300ML?
The melting point is Undetermined. and the boiling point is Not applicable, as aerosol..