Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Buffer Solution pH 10.01 +/- 0.02 @ 25°C
- Product Code
- 89236-552
- Chemical Name
- Not applicable
Regulatory Identifiers
- CAS Number
- Not applicable Check regulations →
Identified Uses
Buffer
Manufacturers & Suppliers
Hach Company
manufacturer
P.O.Box 389, Loveland, CO USA 80539
(970) 669-3050
Emergency Contacts
Emergency Contact
(303) 623-5716
24 Hour Service
Emergency Contact
(515)232-2533
8am - 4pm CST
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air.
Wash skin with plenty of water. Call physician if irritation develops. Remove contaminated clothing.
Flush eyes with water. Call physician if irritation develops.
Never give anything by mouth to an unconscious person. Rinse mouth with plenty of water. Give large quantities of water. Call physician immediately.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use media appropriate to surrounding fire conditions
Not applicable
This product will not burn or explode. May react violently with: strong acids strong bases
As in any fire, wear self-contained breathing apparatus pressure-demand and full protective gear.
Firefighter Protection
As in any fire, wear self-contained breathing apparatus pressure-demand and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Stop spilled material from being released to the environment. Absorb spilled liquid with non-reactive sorbent material. If permitted by regulation, Cover spilled material with a dry acid, such as citric or boric. Scoop up slurry into a large beaker. Adjust to a pH between 6 and 9 with an acid, such as sulfuric or citric. Flush reacted material to the drain with a large excess of water. Otherwise, Pick up spill for disposal and place in a closed container.
Stop spilled material from being released to the environment.
If permitted by regulation, Cover spilled material with a dry acid, such as citric or boric. Scoop up slurry into a large beaker. Adjust to a pH between 6 and 9 with an acid, such as sulfuric or citric. Flush reacted material to the drain with a large excess of water. Otherwise, Pick up spill for disposal and place in a closed container.
Materials: dry acid, such as citric or boric; acid, such as sulfuric or citric
Related Products
Similar products with comparable safety profiles
Buffer Solution pH 10.01 ± 0.02
---
Buffer Solution pH 4.01 +/- 0.02 @ 25°C
CAS: Not applicable
Buffer Solution, pH 10.00
---
Buffer Solution pH 7.00 ± 0.02
---
Buffer Solution pH 4.01 ± 0.02
---
Buffer Solution pH 7.00
---
Buffer Solution, pH 7.00
---
Buffer solution pH10,00(+/-0,05), conserved
UFI: 01WV-HPYF-KA74-3DRU
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes. Wash thoroughly after handling. Maintain general industrial hygiene practices when using this product.
Keep container tightly closed when not in use. Protect from: heat.
Wash thoroughly after handling. Maintain general industrial hygiene practices when using this product.
Protect from: heat.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Maintain general industrial hygiene practices when using this product.
disposable latex gloves
safety glasses with top and side shields
adequate ventilation
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable when stored under proper conditions.
None reported
Heat, Evaporation, Extreme temperatures, Contact with acid or acid fumes, Contact with heat, sparks, open flames or other ignition sources.
acid or acid fumes
carbon dioxide, carbon monoxide, formaldehyde, sodium oxides, nitrogen oxides
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Buffer Solution pH 10.01 +/- 0.02 @ 25°C?
The signal word is no signal word.
What is the physical form of Buffer Solution pH 10.01 +/- 0.02 @ 25°C?
Buffer Solution pH 10.01 +/- 0.02 @ 25°C is a liquid appearing as clear, blue . It has odorless odor.
What is the solubility of Buffer Solution pH 10.01 +/- 0.02 @ 25°C?
Water: Soluble, Acid: Soluble, Other: Not determined
What is Buffer Solution pH 10.01 +/- 0.02 @ 25°C used for?
Buffer
What is the melting point of Buffer Solution pH 10.01 +/- 0.02 @ 25°C?
The melting point is ~ 0 °C (~ 32 °F) and the boiling point is ~ 100 °C (~ 212 °F).