NextSDS Logo
Safety Data Sheet EN

CRC® Brakleen® Brake Parts Cleaner, SCAQMD #1171 Compliant, 14 Wt Oz

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
CRC® Brakleen® Brake Parts Cleaner, SCAQMD #1171 Compliant, 14 Wt Oz
Product Code
1003740

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Brake Parts Cleaner

Uses advised against

None known

Manufacturers & Suppliers

CRC Industries, Inc. logo

CRC Industries, Inc.

manufacturer

885 Louis Dr., Warminster, PA 18974, United States

1-800-556-5074

https://crcindustries.com

Emergency Contacts

Emergency Contact

1-800-424-9300

24-Hour

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Aerosol Cat. 1
Eye Irrit. Cat. 2A
Repr. Cat. 2
STOT SE Cat. 3
STOT RE Cat. 2
Aquatic Acute Cat. 3

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H222 Extremely flammable aerosol
H229 Pressurized container: may burst if heated
H319 Causes serious eye irritation
H336 May cause drowsiness or dizziness
H361d Suspected of damaging the unborn child.
H372 May cause damage to organs (central nervous system, kidneys, peripheral nervous system) through prolonged or repeated exposure

Precautionary Statements

P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P210 Extinguish all flames, pilot lights, and heaters.
P211 Do not spray on an open flame or other ignition source.
P234 Do not apply while equipment is energized.
P251 Do not pierce or burn, even after use.
P261 Do not breathe vapors, spray, mist.
P264 Wash hands thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area. Maintain ventilation during use and until all vapors are gone. Open doors and windows or use other means to ensure a fresh air supply during use and while product is drying. If you experience any symptoms listed on this label, increase ventilation or leave the area.
P280 Wear protective gloves, protective clothing, eye and face protection.
P304 + P340 If inhaled: Remove person to fresh air and keep comfortable for breathing.
P305 + P351 + P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P313 If exposed or concerned: Get medical advice/attention.
P312 Call a poison center or doctor if you feel unwell.
P337 + P313 If eye irritation persists: Get medical advice or attention.
P403 Store in a well-ventilated place.
P405 Store locked up.
P410 + P412 Protect from sunlight. Do not expose to temperatures exceeding 122 °F (50 °C).
P501 Dispose of contents/container in accordance with local/regional/national regulations.
Vapors will accumulate readily and may ignite.
Exposure to high temperature may cause can to burst.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Acetone (CAS-No.: 67-64-1) 80 – 100%; Carbon dioxide (CAS-No.: 124-38-9) 7 – 13%; Toluene (CAS-No.: 108-88-3) 1 – 5%

Chemical Name CAS Number Concentration Hazardous
Acetone 67-64-1 80 - 100% No
Carbon dioxide 124-38-9 7 - 13% No
Toluene 108-88-3 1 - 5% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove person to fresh air and keep comfortable for breathing. Get medical advice/attention if you feel unwell.

Symptoms: Depression of the central nervous system, headaches, dizziness, drowsiness, loss of coordination.

Skin contact

Wash skin with soap and water. Get medical advice/attention if you feel unwell.

Symptoms: Repeated exposure may cause skin dryness or cracking.

Eye contact

Immediately rinse with water for a prolonged period while holding the eyelids wide open. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.

Symptoms: Causes serious eye irritation. Symptoms may include stinging, tearing, redness, swelling, and blurred vision.

Ingestion

Rinse mouth. Call a poison center/doctor/physician if you feel unwell.

Symptoms: May cause mild irritation to the digestive tract.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water fog. Dry powder. Foam. Carbon dioxide.

Unsuitable media

Do not use a heavy water stream.

Specific hazards

Extremely flammable aerosol. Pressurized container may rupture when exposed to heat or flame.

Instructions

Eliminate all ignition sources if safe to do so. Fight fire remotely due to the risk of explosion. Do not enter fire area without proper protective equipment, including respiratory protection.

Firefighter Protection

Self-contained breathing apparatus. Do not attempt to take action without suitable protective equipment. Complete protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Eliminate every possible source of ignition. Stop leak if safe to do so. Absorb spillage to prevent material-damage. Ventilate spillage area. Do not breathe vapors, spray, mist. Avoid contact with skin and eyes. Evacuate unnecessary personnel.

Environmental

Avoid release to the environment.

Cleanup methods

Take up mechanically (sweeping, shoveling) and collect in suitable container for disposal. Clean surface thoroughly to remove residual contamination.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Exposure to high temperature may cause can to burst. Do not use if spray button is missing or defective. Prevent the build-up of electrostatic charge. Use caution around energized equipment. The metal container will conduct electricity if it contacts a live source. This may result in injury to the user from electrical shock and/or flash fire. Avoid contact with skin and eyes. Do not breathe vapors, spray, mist. Use only outdoors or in a well-ventilated area. Maintain ventilation during use and until all vapors are gone. Open doors and windows or use other means to ensure a fresh air supply during use and while product is drying. If you experience any symptoms listed on this label, increase ventilation or leave the area. Wear personal protective equipment.

Storage

Level 3 Aerosol. Store locked up. Keep cool. Keep in fireproof place. Store in a well-ventilated place. Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F.

Hygiene

Always observe good personal hygiene measures, such as washing after handling the material and before eating, drinking, and/or smoking. Routinely wash work clothing and protective equipment to remove contaminants. Do not eat, drink or smoke when using this product.

Fire prevention

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Prevent the build-up of electrostatic charge. Keep in fireproof place.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Provide local exhaust or general room ventilation. Ensure good ventilation of the work station.

Hands

Wear protective gloves such as: Nitrile. Neoprene. Polyvinylalcohol (PVA)

Eyes

Wear safety glasses with side shields (or goggles).

Respiratory

If engineering controls are not feasible or if exposure exceeds the applicable exposure limits, use a NIOSH-approved cartridge respirator with an organic vapor cartridge. Use a self-contained breathing apparatus in confined spaces and for emergencies. Air monitoring is needed to determine actual employee exposure levels.

Skin/Body

Wear suitable protective clothing

Environmental

Avoid release to the environment.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Colorless
Colour Intensity
---
Form
---
Odor
Sweet
Odor Threshold
No data available
Ph
No data available
Melting Point
-138.8 °F (-94.9 °C) estimated
Boiling Point
132.9 °F (56.1 °C) estimated
Flash Point
< 0 °F (< -17.8 °C) estimated
Freezing Point
-138.8 °F (-94.9 °C) estimated
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Fast
Vapor Pressure
6962 hPa estimated
Vapor Density
---
Relative Density
0.88 estimated
Bulk Density
---
Density
7.32 lb/gal estimated
Flammability
Not applicable.
Upper Explosive Limit
12.8 % estimated
Lower Explosive Limit
1.2 % estimated
Explosive Limits
---
Auto Ignition Temperature
869 °F (465 °C) estimated
Decomposition Temperature
No data available
Solubility
Water: Slightly soluble
Partition Coefficient
No data available
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
No data available
Kinematic Viscosity
No data available
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Extremely flammable aerosol. Pressurized container: may burst if heated.

Reactivity

The product is non-reactive under normal conditions of use, storage and transport.

Hazardous reactions

May mass explode in fire. Heating may cause a fire or explosion.

Avoid

High temperature. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.

Incompatible

Acids. Aluminum. Strong oxidizing agents.

Decomposition

Carbon oxides (CO, CO2).

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1950
Shipping Name
Aerosols
Transport Class
2.1
IMDG

SW1, SW22

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for CRC® Brakleen® Brake Parts Cleaner, SCAQMD #1171 Compliant, 14 Wt Oz?

The signal word is danger.

What is the physical form of CRC® Brakleen® Brake Parts Cleaner, SCAQMD #1171 Compliant, 14 Wt Oz?

CRC® Brakleen® Brake Parts Cleaner, SCAQMD #1171 Compliant, 14 Wt Oz is a liquid with colorless color. It has sweet odor.

What is the solubility of CRC® Brakleen® Brake Parts Cleaner, SCAQMD #1171 Compliant, 14 Wt Oz?

Water: Slightly soluble

What is CRC® Brakleen® Brake Parts Cleaner, SCAQMD #1171 Compliant, 14 Wt Oz used for?

Brake Parts Cleaner

What are the hazard statements for CRC® Brakleen® Brake Parts Cleaner, SCAQMD #1171 Compliant, 14 Wt Oz?

This substance has 6 hazard statements:

  • H222: Extremely flammable aerosol
  • H229: Pressurized container: may burst if heated
  • H319: Causes serious eye irritation
  • H336: May cause drowsiness or dizziness
  • H361d: Suspected of damaging the unborn child.
  • H372: May cause damage to organs (central nervous system, kidneys, peripheral nervous system) through prolonged or repeated exposure

What is the melting point of CRC® Brakleen® Brake Parts Cleaner, SCAQMD #1171 Compliant, 14 Wt Oz?

The melting point is -138.8 °F (-94.9 °C) estimated and the boiling point is 132.9 °F (56.1 °C) estimated.