Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Spray White Grease 3
- Product Code
- 50073
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
FOR PROFESSIONAL AND INDUSTRIAL USE ONLY, Grease
Manufacturers & Suppliers
KENT (United Kingdom) Ltd
manufacturer
Forsyth House, Pitreavie Drive, Pitreavie Business Park, Dunfermline, Fife, KY11 8US
Emergency Contacts
KENT (United Kingdom) Ltd
+44 01383 723344
Monday - Thursday 8.30am - 5.30pm, Friday 9.00am - 3.00pm
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of the substances listed below with harmless additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| butane, pure EC: 203-448-7 | 106-97-8 | 25 - 50% | Yes |
| Hydrocarbons, C7, n-alkanes isoalkanes, cyclic EC: 927-510-4 | --- | 25 - 50% | Yes |
| Propane liquefied EC: 200-827-9 | 74-98-6 | 10 - 25% | Yes |
| Hydrocarbons, C6-C7, n-alkanes, isoalkanes, cyclics, <5% n-hexane EC: 921-024-6 | --- | 5 - 10% | Yes |
| Isobutane EC: 200-857-2 | 75-28-5 | 5% | Yes |
| calcium dihydroxide EC: 215-137-3 | 1305-62-0 | 3% | Yes |
For the wording of the listed hazard phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
In case of unconsciousness bring patient into stable side position for transport.
If skin irritation continues, consult a doctor.
Rinse opened eye for several minutes under running water. If symptoms persist, consult doctor.
In case of persistent symptoms consult doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Alcohol-resistant foam. Use fire fighting measures that suit the environment.
Formation of poisonous gases during heating or in fires.
Cool endangered containers with water spray jet.
Firefighter Protection
Do not inhale explosion gases or combustion gases. Wear self-contained breathing apparatus. Wear full protective suit. Put on breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation. Particular danger of slipping on leaked / spilled product. Put on breathing apparatus. Wear protective equipment. Keep unprotected persons away.
Do not allow to enter drainage system, surface or ground water.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation/exhaustion at the workplace.
Store in cool location. Protect from heat and direct sunlight. Store container in a well ventilated position.
Keep ignition sources away - Do not smoke. Protect against electrostatic charges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Material of gloves: Nitrile rubber, NBR. Recommended thickness of the material: ≥ 0.5mm. Wear suitable gloves tested to EN 374. Value for the permeation: Level 6 > 480 minutes. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Safety glasses (EN 166)
Only during spraying without adequate removal by suction. Filter A2 / P2 (EN 14387)
Protective work clothing (EN-13034/6)
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
No dangerous reactions known
No further relevant information available.
No further relevant information available.
No dangerous decomposition products known
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1
SW1 Protected from sources of heat. SW22 For AEROSOLS with a maximum capacity of 1 litre: Category A. For AEROSOLS with a capacity above 1 litre: Category B. For WASTE AEROSOLS: Category C, Clear of living quarters. SG69 For AEROSOLS with a maximum capacity of 1 litre: Segregation as for class 9. Stow 'separated from' class 1 except for division 1.4. For AEROSOLS with a capacity above 1 litre: Segregation as for the appropriate subdivision of class 2. For WASTE AEROSOLS: Segregation as for the appropriate subdivision of class 2.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Spray White Grease 3?
The signal word is danger.
What is the physical form of Spray White Grease 3?
Spray White Grease 3 is a aerosol appearing as aerosol with whitish color. It has characteristic odor.
What is Spray White Grease 3 used for?
FOR PROFESSIONAL AND INDUSTRIAL USE ONLY, Grease
What are the hazard statements for Spray White Grease 3?
This substance has 6 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of Spray White Grease 3?
The melting point is Not determined and the boiling point is Not applicable, as aerosol.