Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- PAT®-VP-644
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Preparation is used in diluted form in industrial processing (closed systems) operated by trained staff; Preparation is used as lubricant and release agent (processing aid) for the processing of duroplastic resins and polymers
Manufacturers & Suppliers
E. und P. Würtz GmbH & Co. KG
manufacturer
Industriegebiet, D-55411 Bingen, Germany
http://www.wuertz.com
Emergency Contacts
E. und P. Würtz GmbH & Co. KG
+49 (0) 6721 / 9690-0
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Lubricant- and Release Agent-Formulation (aqueous formulation, based on polymers)
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air.
Symptoms: irritation
Wash off properly with water and soap.
Symptoms: skin irritation
Flush with large amounts of water for at least 15 minutes, keeping eyelids open.
Symptoms: persistent irritation
Immediately clean mouth thoroughly with water, drink plenty of water.
Immediate Medical Attention
If irritation persists, get medical attention. If skin irritation occurs, get medical attention. Medical attention recommended, if persistent irritation occurs. Consult medical doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, Carbon-dioxide (CO₂), dry chemical
The usage of air-masks is recommended. No special procedures are required.
Firefighter Protection
The usage of air-masks is recommended.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Spills should be taken up with suitable absorbent and placed in containers. Spill area can be washed with water.
Spills should be taken up with suitable absorbent and placed in containers. Spill area can be washed with water.
Materials: suitable absorbent
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Store at ambient temperature, avoid frost.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Chemically resistant gloves are recommended.
Safety Glasses with side shields are recommended.
Avoid inhalation of vapours.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable in normal industrial use.
None known.
Carbon-monoxide (CO), Carbon-dioxide (CO₂)
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for PAT®-VP-644?
The signal word is no signal word.
What is the physical form of PAT®-VP-644?
PAT®-VP-644 is a liquid appearing as yellowish liquid . It has typical odor.
What is PAT®-VP-644 used for?
Preparation is used in diluted form in industrial processing (closed systems) operated by trained staff; Preparation is used as lubricant and release agent (processing aid) for the processing of duroplastic resins and polymers