Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- PAT®-VP-644
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Preparation is used as lubricant and release agent (processing aid) for the processing of duroplastic resins and polymers
Manufacturers & Suppliers
E. und P. Würtz GmbH & Co. KG
manufacturer
Industriegebiet, D-55411 Bingen, Germany
+49 (0) 6721 / 9690-0
http://www.wuertz.com
Emergency Contacts
E. und P. Würtz GmbH & Co. KG
+49 (0) 6721 / 9690-0
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Lubricant- and Release Agent-Formulation (aqueous formulation, based on polymers)
First Aid Measures
Emergency procedures for chemical exposure incidents
In case of irritation, move to fresh air.
Wash off properly with water and soap.
Flush with large amounts of water for at least 15 minutes, keeping eyelids open.
Immediately clean mouth thoroughly with water, drink plenty of water.
Immediate Medical Attention
If irritation persists, get medical attention (inhalation). If skin irritation occurs, get medical attention (skin). Medical attention recommended, if persistent irritation occurs (eyes). Consult medical doctor (ingestion).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, Carbon-dioxide (CO₂), dry chemical
The usage of air-masks is recommended. No special procedures are required.
Firefighter Protection
The usage of air-masks is recommended.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Spills should be taken up with suitable absorbent and placed in containers.
Materials: suitable absorbent
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Store at ambient temperature, avoid frost. The product should not be discharged or flushed into sewers or public waterways.
Store at ambient temperature, avoid frost.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
The data for this section has not been processed yet.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable in normal industrial use.
None known.
Carbon-monoxide (CO), Carbon-dioxide (CO₂)
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for PAT®-VP-644?
The signal word is no signal word.
What is the physical form of PAT®-VP-644?
PAT®-VP-644 is a liquid appearing as yellowish liquid . It has typical odor.
What is PAT®-VP-644 used for?
Preparation is used as lubricant and release agent (processing aid) for the processing of duroplastic resins and polymers