Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Tork Constant Air Freshener Odor Neutralizer
- Product Code
- 11436601-00001
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
perfumes
Uses advised against
Not applicable
Manufacturers & Suppliers
Essity Professional Hygiene NA
manufacturer
P.O. Box 2400, Neenah, United States of America WI 54957-2400
Emergency Contacts
CHEMTREC
1-800-424-9300
24-Hour
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, remove to fresh air. Get medical attention if symptoms occur.
In case of contact, immediately flush skin with plenty of water. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Symptoms: May cause an allergic skin reaction.
Flush eyes with water as a precaution. Get medical attention if irritation develops and persists.
If swallowed, DO NOT induce vomiting. Get medical attention if symptoms occur. Rinse mouth thoroughly with water.
Immediate Medical Attention
Get medical attention if symptoms occur.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, Alcohol-resistant foam, Carbon dioxide (CO2), Dry chemical
High volume water jet
Do not use a solid water stream as it may scatter and spread fire. Flash back possible over considerable distance. Vapors may form explosive mixtures with air. Exposure to combustion products may be a hazard to health.
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Use water spray to cool unopened containers. Remove undamaged containers from fire area if it is safe to do so. Evacuate area.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus. Use personal protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Remove all sources of ignition. Use personal protective equipment. Follow safe handling advice (see section 7) and personal protective equipment recommendations (see section 8).
For large spills, provide diking or other appropriate containment to keep material from spreading. If diked material can be pumped, store recovered material in appropriate container.
Avoid release to the environment. Prevent further leakage or spillage if safe to do so. Prevent spreading over a wide area (e.g., by containment or oil barriers). Retain and dispose of contaminated wash water.
Non-sparking tools should be used. Soak up with inert absorbent material. Suppress (knock down) gases/vapors/mists with a water spray jet. Clean up remaining materials from spill with suitable absorbent.
Materials: inert absorbent material
Related Products
Similar products with comparable safety profiles
Charm Air Fresheners 240ml, All variants, (Compressed Air)
---
Teepol Apple Tagfresh Airfreshener
---
Febreze Professional Classic Fabric Refresher
---
Charm Air Freshener 240ml, All variants.
---
Nilodor Concentrate, All Fragrances
---
Tork Extra Mild Foam Soap
---
CHARM AIR FRESHENER AROMA ROSE 240ML
---
HERTEL Glass Cleaner Fresh Ambiance
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not get on skin or clothing. Avoid breathing mist or vapors. Do not swallow. Avoid contact with eyes. Handle in accordance with good industrial hygiene and safety practice, based on the results of the workplace exposure assessment. Keep container tightly closed. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Take precautionary measures against static discharges. Take care to prevent spills, waste and minimize release to the environment.
Keep in properly labeled containers. Keep tightly closed. Keep in a cool, well-ventilated place. Store in accordance with the particular national regulations. Keep away from heat and sources of ignition.
Handle in accordance with good industrial hygiene and safety practice
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation, especially in confined areas. Minimize workplace exposure concentrations.
Material: Chemical-resistant gloves. Break through time: > 10 min. Remarks: Choose gloves to protect hands against chemicals depending on the concentration specific to place of work. For special applications, we recommend clarifying the resistance to chemicals of the aforementioned protective gloves with the glove manufacturer.
Wear the following personal protective equipment: Safety glasses
General and local exhaust ventilation is recommended to maintain vapor exposures below recommended limits. Where concentrations are above recommended limits or are unknown, appropriate respiratory protection should be worn. Follow OSHA respirator regulations (29 CFR 1910.134) and use NIOSH/MSHA approved respirators. Protection provided by air purifying respirators against exposure to any hazardous chemical is limited. Use a positive pressure air supplied respirator if there is any potential for uncontrolled release, exposure levels are unknown, or any other circumstance where air purifying respirators may not provide adequate protection.
Select appropriate protective clothing based on chemical resistance data and an assessment of the local exposure potential. Wear the following personal protective equipment: Skin contact must be avoided by using impervious protective clothing (gloves, aprons, boots, etc).
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Not classified as a reactivity hazard.
Combustible liquid. Vapors may form explosive mixture with air. Can react with strong oxidizing agents.
Heat, flames and sparks.
Oxidizing agents
No hazardous decomposition products are known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- NA 1993
- Shipping Name
- Combustible liquid, n.o.s. (Dimethyl octadienol)
- Transport Class
- CBL
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Tork Constant Air Freshener Odor Neutralizer?
The signal word is warning.
What is the physical form of Tork Constant Air Freshener Odor Neutralizer?
Tork Constant Air Freshener Odor Neutralizer is a liquid appearing as liquid with red color. It has fruity odor.
What is Tork Constant Air Freshener Odor Neutralizer used for?
perfumes
What are the hazard statements for Tork Constant Air Freshener Odor Neutralizer?
This substance has 2 hazard statements:
- H227: Combustible liquid.
- H317: May cause an allergic skin reaction.
What is the melting point of Tork Constant Air Freshener Odor Neutralizer?
The melting point is No data available and the boiling point is No data available.