Tork Floral Air Freshener Spray

Fresh air and rest. If symptoms persist seek medical advice.

Symptoms: Breathing may cause headache, vertigo, weakness and sickness.

Remove contaminated clothes. Wash the skin with soap and water.

Symptoms: Allergic reactions can occur in sensitized individuals.

Rinse the eye for several minutes with lukewarm water. If irritation persists call a doctor.

Symptoms: Irritation.

Rinse nose, mouth and throat with water. DO NOT induce vomiting.

Extinguish with water mist, powder, carbon dioxide or alcohol-resistant foam.

May not be extinguished with water dispersed under high pressure.

In case of fire, high pressure may build up causing the packaging to explode.

Cool closed containers that were exposed to fire with water. Protective measures should be taken regarding other material at the site of the fire.

Small spills can be wiped up with a cloth or similar. Then flush the spill site with water.

Larger spills should first be covered with sand or earth and then be collected.

Avoid release to drains, soil or watercourses.

wiped up with a cloth or similar, flush the spill site with water, collected

Avoid open fire, hot items, sparks or other ignition sources. Take precautionary measures against static discharge. Do not inhale the fumes and avoid exposure to skin, eyes and clothing. Use recommended safety equipment, see section 8.

Store tightly, in original packaging. Keep away from heat and sunlight. Store in a well-ventilated space. Store in dry and cool area.

Wash your hands after using the product. Remove contaminated clothing.

Avoid open fire, hot items, sparks or other ignition sources.

The ventilation in the workplace must ensure an air quality that meets the requirements of the current working environment legislation. Local exhaust ventilation should be used to remove airborne contaminants at the source.

Use protective gloves fulfilling the standard EN374 if there is a risk of direct contact. The most suitable protective glove should be chosen in consultation with the glove supplier, taking into account the risk assessment for the specific task and the properties of the chemicals involved. Note that the breakthrough time of the material is affected by the duration of the exposure, temperature conditions, abrasion, etcetera. During continuous contact use gloves with a minimum breakthrough time of at least 240 minutes, preferably over 480 minutes. Based on the chemical properties of the product, the following glove materials are recommended (EN 374): - Nitrile rubber.

Eye protection should be worn if there is any danger of direct exposure or splashing.

Respiratory protective equipment is not normally required when working with this product, given that adequate ventilation is provided. The most appropriate respiratory protective equipment should be decided in consultation with the appointed safety representative, taking into account the risk assessment for the specific task. Based on the physical and chemical properties of the product, the following filter type(s) and/or filter combination(s) are recommended: - A/P2. Note that a breathing mask with a filter does not protect against lack of oxygen in the air. Breathing apparatus may be required.

For limitation of environmental exposure, see Section 12.

The product is stable at normal storage and handling conditions.

The product contains no substances which can lead to hazardous reactions at normal use.

No hazardous reactions known.

Avoid heat, sparks and open flames. Do not expose to temperatures above 50 °C. Protect from direct sunlight.

Avoid contact with strong acids and bases.

None under normal conditions.

Tunnel category: D

Varying stowage category