NextSDS Logo
Safety Data Sheet EN

HP Color LaserJet CF412A-X-XC-XH-JC Yellow Print Cartridge

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
HP Color LaserJet CF412A-X-XC-XH-JC Yellow Print Cartridge
Product Code
CF412A-X-XC-XH-JC

Regulatory Identifiers

CAS Number
N/A

Identified Uses

This product is a yellow toner preparation that is used in HP Color LaserJet Pro M452, HP Color LaserJet Pro MFP M477, HP Color LaserJet Pro MFP M377 series printers.

Uses advised against

None known.

Manufacturers & Suppliers

H

HP Inc.

manufacturer

1501 Page Mill Road, Palo Alto, CA 94304-1112, United States

650-857-1501

Emergency Contacts

HP Inc. health effects line

1-800-457-4209

HP Inc. health effects line

1-760-710-0048

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Hazard Statements

Not available.

Precautionary Statements

Not available.
Not available.
Not available.
Not available.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Material name: CF412A-X-XC-XH-JC 13779 Version #: 07 Revision date: 22-Oct-2025 Issue date: 06-Oct-2021 SDS US

Chemical Name CAS Number Concentration Hazardous
Styrene acrylate copolymer --- 85% No
Pigment --- 10% No
Wax --- 10% No
SILICA, AMORPHOUS 7631-86-9 3% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move person to fresh air immediately. If irritation persists, consult a physician.

Skin contact

Wash affected areas thoroughly with mild soap and water. Get medical attention if irritation develops or persists.

Eye contact

Do not rub eyes. Immediately flush with large amounts of clean, warm water (low pressure) for at least 15 minutes or until particles are removed. If irritation persists, consult a physician.

Ingestion

Rinse mouth out with water. Drink one to two glasses of water. If symptoms occur, consult a physician.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

CO2, water, or dry chemical

Unsuitable media

None known.

Specific hazards

Like most organic material in powder form, toner can form explosive dust-air mixtures when finely dispersed in air.

Instructions

If fire occurs in the printer, treat as an electrical fire.

Firefighter Protection

Not available.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

Do not flush into surface water or sanitary sewer system.

Cleanup methods

Clean remainder with a damp cloth or vacuum cleaner.

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Keep out of the reach of children. Avoid inhalation of dust and contact with skin and eyes. Use with adequate ventilation. Keep away from excessive heat, sparks, and open flames.

Storage

Keep out of the reach of children. Keep tightly closed and dry. Store at room temperature.

Hygiene

Keep out of the reach of children. Avoid contact with skin and eyes.

Fire prevention

Keep away from excessive heat, sparks, and open flames.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Use in a well ventilated area.

Hands

No personal hand protective equipment required under normal conditions of use.

Eyes

No personal eye/face protective equipment required under normal conditions of use.

Respiratory

No personal respiratory protective equipment required under normal conditions of use.

Skin/Body

Not available.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Softening Point
176 - 266 °F (80 - 130 °C)
Kinematic Viscosity
---
Evaporation Rate
Not applicable
Bulk Density
---
Relative Evaporation Rate
---
Boiling Point
Not applicable
Odor Threshold
Not available.
Melting Point
Not available.
Flammability
---
Upper Explosive Limit
Not available.
Voc Content
---
Colour
Yellow
Flash Point
Not applicable
Explosive Limits
---
Decomposition Temperature
>392 °F (>200 °C)
Freezing Point
---
Crystallisation Point
---
Solubility In Fat
---
Physical State
Liquid.
Solubility In Water
Negligible in water. Partially soluble in toluene and xylene.
Partition Coefficient
Not available.
Colour Intensity
---
Solubility
---
Ph
Not applicable
Molecular Weight
---
Metal Corrosion
---
Solidification Point
---
Form
solid
Density
---
Physical State Data
solid
Cloud Point
---
Properties Status
---
Appearance
Fine powder
State Under Standard Conditions
---
Relative Density
1 - 1.2
Vapor Density
Not applicable
Lower Explosive Limit
Not flammable
Odor
Slight plastic odor
Dynamic Viscosity
Not applicable
Vapor Pressure
---
Auto Ignition Temperature
Not applicable
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal storage conditions.

Reactivity

Not available.

Hazardous reactions

Will not occur.

Avoid

Imaging Drum: Exposure to light

Incompatible

Strong oxidizers

Decomposition

Carbon monoxide and carbon dioxide.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for HP Color LaserJet CF412A-X-XC-XH-JC Yellow Print Cartridge?

The signal word is no signal word.

What is the physical form of HP Color LaserJet CF412A-X-XC-XH-JC Yellow Print Cartridge?

HP Color LaserJet CF412A-X-XC-XH-JC Yellow Print Cartridge is a liquid. appearing as fine powder with yellow color. It has slight plastic odor odor.

What is HP Color LaserJet CF412A-X-XC-XH-JC Yellow Print Cartridge used for?

This product is a yellow toner preparation that is used in HP Color LaserJet Pro M452, HP Color LaserJet Pro MFP M477, HP Color LaserJet Pro MFP M377 series printers.

What are the hazard statements for HP Color LaserJet CF412A-X-XC-XH-JC Yellow Print Cartridge?

This substance has 1 hazard statement:

  • Not available.

What is the melting point of HP Color LaserJet CF412A-X-XC-XH-JC Yellow Print Cartridge?

The melting point is Not available. and the boiling point is Not applicable.