NextSDS Logo
Safety Data Sheet EN

HP LaserJet CF226A-X-XC-XH-JC Print Cartridge

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
HP LaserJet CF226A-X-XC-XH-JC Print Cartridge
Product Code
CF226A-X-XC-XH-JC

Regulatory Identifiers

CAS Number
N/A

Identified Uses

This product is a toner preparation that is used in HP LaserJet Pro M402, HP LaserJet Pro MFP M426 series printers.

Uses advised against

None known.

Manufacturers & Suppliers

H

HP Inc.

manufacturer

1501 Page Mill Road, Palo Alto, CA 94304-1112, United States

650-857-1501

Emergency Contacts

HP Inc. health effects line

1-800-457-4209

HP Inc. health effects line

1-760-710-0048

HP Inc. Customer Care Line

1-800-474-6836

HP Inc. Customer Care Line

1-208-323-2551

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Hazard Statements

Not available.

Precautionary Statements

Not available.
Not available.
Not available.
Not available.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Styrene acrylate copolymer --- 50% No
Iron oxide 1317-61-9 45% No
Wax --- 15% No
SILICA, AMORPHOUS 7631-86-9 3% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move person to fresh air immediately. If irritation persists, consult a physician.

Skin contact

Wash affected areas thoroughly with mild soap and water. Get medical attention if irritation develops or persists.

Eye contact

Do not rub eyes. Immediately flush with large amounts of clean, warm water (low pressure) for at least 15 minutes or until particles are removed. If irritation persists, consult a physician.

Ingestion

Rinse mouth with water. Drink one to two glasses of water. If symptoms occur, consult a physician.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

CO2, water, or dry chemical

Unsuitable media

None known.

Specific hazards

Like most organic material in powder form, toner can form explosive dust-air mixtures when finely dispersed in air.

Instructions

If fire occurs in the printer, treat as an electrical fire.

Firefighter Protection

Not available.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Avoid contact with skin and eyes.

Environmental

Keep out of waterways

Cleanup methods

Slowly vacuum or sweep the material into a bag or other sealed container. Clean remainder with a damp cloth or vacuum cleaner.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Keep out of the reach of children. Avoid inhalation of dust and contact with skin and eyes. Use with adequate ventilation. Keep away from excessive heat, sparks, and open flames.

Storage

Keep out of the reach of children. Keep tightly closed and dry. Store at room temperature.

Hygiene

Avoid contact with skin and eyes.

Fire prevention

Keep away from excessive heat, sparks, and open flames.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Use in a well ventilated area.

Hands

No personal hand protective equipment required under normal conditions of use.

Eyes

No personal eye/face protective equipment required under normal conditions of use.

Respiratory

No personal respiratory protective equipment required under normal conditions of use.

Skin/Body

Not available.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Partition Coefficient
---
Relative Density
---
Solubility
---
Auto Ignition Temperature
---
Odor
Slight plastic odor
Colour Intensity
---
Evaporation Rate
---
Melting Point
Not available.
Ph
Not applicable
Appearance
Fine powder
Upper Explosive Limit
Not available.
Density
---
Lower Explosive Limit
Not flammable
Boiling Point
Not applicable
Solubility In Fat
---
Dynamic Viscosity
---
Bulk Density
---
Explosive Limits
---
Form
solid
Colour
Black.
Flammability
---
Molecular Weight
---
State Under Standard Conditions
---
Crystallisation Point
---
Metal Corrosion
---
Solubility In Water
Negligible in water. Partially soluble in toluene and xylene.
Cloud Point
---
Vapor Pressure
---
Kinematic Viscosity
---
Vapor Density
---
Solidification Point
---
Relative Evaporation Rate
---
Voc Content
Not applicable
Flash Point
Not applicable
Physical State Data
solid
Odor Threshold
Not available.
Decomposition Temperature
392 °F (200 °C)
Physical State
Liquid.
Properties Status
---
Freezing Point
Not available.
Softening Point
194 - 284 °F (90 - 140 °C)
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal storage conditions.

Reactivity

Not available.

Hazardous reactions

None.

Avoid

None.

Incompatible

Acids, Bases, Oxidizing agents, Reducing agents.

Decomposition

Carbon monoxide and carbon dioxide.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for HP LaserJet CF226A-X-XC-XH-JC Print Cartridge?

The signal word is no signal word.

What is the physical form of HP LaserJet CF226A-X-XC-XH-JC Print Cartridge?

HP LaserJet CF226A-X-XC-XH-JC Print Cartridge is a liquid. appearing as fine powder with black. color. It has slight plastic odor odor.

What is HP LaserJet CF226A-X-XC-XH-JC Print Cartridge used for?

This product is a toner preparation that is used in HP LaserJet Pro M402, HP LaserJet Pro MFP M426 series printers.

What are the hazard statements for HP LaserJet CF226A-X-XC-XH-JC Print Cartridge?

This substance has 1 hazard statement:

  • Not available.

What is the melting point of HP LaserJet CF226A-X-XC-XH-JC Print Cartridge?

The melting point is Not available. and the boiling point is Not applicable.