Clorox Clean-Up Cleaner with Bleach

Remove person to fresh air and keep comfortable for breathing. If you feel unwell, seek medical advice.

Symptoms: Prolonged inhalation may be harmful.

Wash skin with plenty of water. Obtain medical attention if irritation persists.

Symptoms: Prolonged or repeated contact may dry skin and cause irritation.

IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice and attention.

Symptoms: Causes serious eye irritation. Symptoms may include stinging, tearing, redness, swelling, and blurred vision.

Do not induce vomiting. If vomiting occurs have person lean forward. Never give anything by mouth to an unconscious person. Call a poison center or a doctor if you feel unwell.

Symptoms: May cause stomach distress, nausea or vomiting.

Treat for surrounding material.

Do not use a water jet since it may cause the fire to spread.

During fire, gases hazardous to health may be formed. In case of fire or explosion do not breathe fumes.

In case of fire: Stop leak if safe to do so. Do not enter fire area without proper protective equipment, including respiratory protection. Move containers from fire area if it can be done without personal risk.

Ventilate spillage area. Stop leak if safe to do so. Evacuate unnecessary personnel.

Avoid release to the environment.

Soak up with inert absorbent material (for example sand, sawdust, a universal binder, silica gel). Clean contaminated surfaces with an excess of water.

Materials: inert absorbent material (for example sand, sawdust, a universal binder, silica gel)

Avoid contact with skin and eyes. Avoid breathing vapors, mist. Do not taste or swallow. Ensure good ventilation of the work station. Wear personal protective equipment. Handle and open container with care.

KEEP OUT OF REACH OF CHILDREN AND PETS. Store tightly closed in a dry, cool and well-ventilated place. Store away from incompatible materials (see Section 10 of the SDS).

Do not eat, drink or smoke when using this product. Always wash hands after handling the product.

Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation, or other engineering controls to maintain airborne levels below recommended exposure limits. If exposure limits have not been established, maintain airborne levels to an acceptable level.

Wear protective gloves. Confirm with a reputable supplier first.

Wear safety glasses with side shields (or goggles).

Where exposure guideline levels may be exceeded, use an approved NIOSH respirator. Respirator should be selected by and used under the direction of a trained health and safety professional following requirements found in OSHA's respirator standard (29 CFR 1910.134), CAN/CSA-Z94.4 and ANSI's standard for respiratory protection (Z88.2).

Wear suitable protective clothing. As required by employer code.

Avoid release to the environment.

Stable under normal conditions.

The product is non-reactive under normal conditions of use, storage and transport.

No dangerous reactions known under normal conditions of use.

Keep away from heat and direct sunlight. Do not mix with other chemicals.

Strong oxidizing agents.

May include and are not limited to: oxides of carbon.