Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Desoldering wick CPN series
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
TAIYO ELECTRIC IND. CO., LTD.
manufacturer
2-16-8 Yamate Fukuyama Hiroshima 720-0092 JAPAN
084-951-1512
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing. If experiencing respiratory symptoms, call a doctor.
Take off all contaminated clothing immediately. Wash skin with plenty of water and soap. Wash contaminated clothing before reuse. If skin irritation or rash occurs: Get medical advice/attention.
Symptoms: skin irritation or rash
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Do not force eyes open if too uncomfortable. If eye irritation persists: Get medical advice/attention.
Rinse mouth. Do NOT induce vomiting. Get medical advice/attention if you feel unwell.
Immediate Medical Attention
Get medical advice/attention if you feel unwell.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry chemical, water spray, water sprinkling, dry sand
Straight stream of water, foam extinguisher, carbon dioxide
May produce irritating/toxic/corrosive gas and fumes if burning.
Firefighter Protection
Wear appropriate respirator and chemical protective equipment when firefighting.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
When you use, wear appropriate protection to avoid contact with eyes/skin, or to avoid inhalation of dust. Use from upwind as much as possible.
Avoid release into river, etc. to avoid effects to environment.
Collect and store in a suitable container.
Materials: suitable container
Related Products
Similar products with comparable safety profiles
RS-60/40 Sn-Pb No Clean Solder Wire
UFI: GAQJ-Q910-MJ07-D7X6
NO CLEAN SOLDER FLUXES
---
Chip Quik Lead Free Solder Wire and Spheres Series: SMDSWLF, SMDSWLTFLP, SMD_NL, SMD20
---
CW8400 Circuit-Works® Lead-Free Flux Dispensing Pen (UFI)
UFI: 9FC8-D0P6-5009-UE3N
Weller Pyropen Refill
---
Lead Free Flux Remover
---
44 Sn60Pb40 Solder Wire / Preform
---
IONOL CP molten
CAS: 128-37-0
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not eat, drink or smoke when using this product. Use only outdoors or in a well-ventilated area. Do not breathe fumes/gas/mist/vapors when burning. Do not breathe dust. Wash hands thoroughly after handling. Beware of burns when heating. Do not use near combustible materials.
Protect from sunlight. Store in a well-ventilated and cool place. Keep container tightly closed. Keep away from fire, heat. Avoid contact or storage in the same place with incompatible materials mentioned in '10. Stability and Reactivity'. Store locked up.
Do not eat, drink or smoke when using this product. Wash hands thoroughly after handling.
Keep away from fire, heat.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Seal the source at the handling place. Use local exhaust ventilation.
Wear protective gloves. Wear protective clothing.
Wear eye protection/face protection.
Wear respiratory protection.
Wear protective clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Green rust when exposed to humid air.
Reacts with oxidizers (e.g. chlorate) and may cause explosion.
Contacts with humid air, incompatible materials.
Oxidizers, strong oxidizers.
Generates carbon monoxide, carbon dioxide, copper fumes.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Desoldering wick CPN series?
The signal word is warning.
What is the physical form of Desoldering wick CPN series?
Desoldering wick CPN series is a pre-fluxed braided copper wire appearing as pre-fluxed braided copper wire . It has mild solvent odor odor.
What is the solubility of Desoldering wick CPN series?
Insoluble in water
What are the hazard statements for Desoldering wick CPN series?
This substance has 3 hazard statements:
- H317: May cause an allergic skin reaction.
- H335: May cause respiratory irritation (Respiratory tract irritation).
- Fumes generated by heating cause eye/nose/throat irritation.
What is the melting point of Desoldering wick CPN series?
The melting point is 1085°C .