Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- EDM Euro Supreme
- Product Code
- 10243
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Dielectric machining fluid
Uses advised against
For intended industrial use only
Manufacturers & Suppliers
Commonwealth Oil Corporation, A Houghton Company
manufacturer
2080 Ferriss Rd N., P.O. Box 370, Harrow, Ontario, N0R 1G0, Canada
(519) 738-3503
http://www.houghtonintl.com/
Emergency Contacts
CANUTEC
(613) 996-6666
24 hr
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Petroleum hydrocarbon #1 | --- | 80 - 90% | Yes |
| Petroleum hydrocarbon #2 | --- | 5 - 10% | Yes |
| Petroleum hydrocarbon #3 | --- | 5 - 10% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move victim to fresh air if adverse effects are observed.
IF ON SKIN: Wash skin with soap and water. Remove contaminated clothing and wash before reuse. If skin irritation occurs: Get medical advice/attention.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
Do NOT induce vomiting. Seek medical attention.
Immediate Medical Attention
Seek medical attention.
Medical Treatment
All treatments should be based on observed signs and symptoms of distress in the patient. Consideration should be given to the possibility that overexposure to materials other than this product may have occurred.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Regular foam, carbon dioxide, dry chemical.
Avoid the use of water jet, as this may spread the fire.
No unusual hazard noted. Treat as oil fire.
Water spray may be used to cool containers exposed to fire.
Firefighter Protection
Structural firefighters' protective clothing will only provide limited protection. Wear chemical protective clothing that is specifically recommended by the manufacturer. It may provide little or no thermal protection. Wear positive pressure self-contained breathing apparatus (SCBA).
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not touch or walk through spilled material.
Dike far ahead of liquid spill for later disposal.
Avoid run off to waterways and sewers.
Recover free liquid for recycle or disposal.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not mix or store with strong oxidants. Empty container contains product residue which may exhibit hazards of product.
Store in a dry, well ventilated place. Keep container tightly closed when not in use. Keep away from open flame. Keep product from freezing. (Product will freeze at 4°C/39°F)
Handle in accordance with good industrial hygiene and safety practice. Wash thoroughly with soap and water after handling and before eating or drinking. Safety shower and eye wash should be available close to work station.
Keep away from open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use adequate mechanical (general) ventilation or local exhaust as needed to control concentration of airborne contaminants below applicable exposure limit values.
Wear protective gloves- neoprene, butyl or nitrile rubber with cuffs.
Wear safety goggles.
Not necessary under conditions of normal use. In case of insufficient ventilation, wear suitable respiratory equipment if exposure limits are exceeded.
Where extensive dermal exposure may be expected, either a chemical suit or chemical apron will be needed.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal temperatures and pressures.
No dangerous reaction known under conditions of normal use.
Not determined
Not determined
Do not mix with strong oxidants.
None known under normal use.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for EDM Euro Supreme?
The signal word is danger.
What is the physical form of EDM Euro Supreme?
EDM Euro Supreme is a liquid appearing as clear water white or pale yellow liquid . It has mild odor.
What is the solubility of EDM Euro Supreme?
Insoluble in water
What is EDM Euro Supreme used for?
Dielectric machining fluid
What are the hazard statements for EDM Euro Supreme?
This substance has 1 hazard statement:
- H304: May be fatal if swallowed or enters airways
What is the melting point of EDM Euro Supreme?
The melting point is 4°C (39°F) and the boiling point is 248 - 284°C, 478 - 544°F.