NextSDS Logo
Safety Data Sheet EN

GREASED LIGHTNING CLASSIC CLEANER & DEGREASER (SUPER STRENGTH)

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
GREASED LIGHTNING CLASSIC CLEANER & DEGREASER (SUPER STRENGTH)
Product Code
52320GRL

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Consumer use.

Uses advised against

Do not mix with other chemicals

Manufacturers & Suppliers

H

HomeCare Labs, Inc.

P.O. Box 491150, Lawrenceville, GA 30049-1002

(800) 949-7946

Emergency Contacts

Chemtrec (Transportation)

1-800-424-9300

Chemtrec (Transportation)

703-527-3887

Poison Control Center (Medical)

(877) 800-5553

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Irrit. Cat. 2
Eye Dam. Cat. 1
Met. Corr. Cat. 1

GHS Pictograms

GHS05 - Corrosive

GHS05

Hazard Statements

H290 May be corrosive to metals
H315 Causes skin irritation
H318 Causes serious eye damage

Precautionary Statements

P234 Keep only in original container
P264 Wash face, hands and any exposed skin thoroughly after handling
P280 Wear protective gloves/protective clothing/eye protection/face protection
P302 + P352 IF ON SKIN: Wash with plenty of soap and water
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing
P310 Immediately call a POISON CENTER or doctor/physician
P332 + P313 If skin irritation occurs: Get medical advice/attention
P362 + P364 Take off contaminated clothing and wash before reuse
P390 Absorb spillage to prevent material damage
P390 Store in corrosive resistant. ? container with a resistant inner liner

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Surfactant --- 2% No
1-(2-butoxy-1-methylethoxy)propan-2-ol 29911-28-2 1.47% No
sodium hydroxide (Solution) 1310-73-2 0.65% No
2-butoxyethanol 111-76-2 0.3% No
sulphuric acid (Spent) 7664-93-9 0.02745% No
Sulfur dioxide [NF] 7446-09-5 0.00183% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove to fresh air. Call a physician or poison control center immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.

Skin contact

Immediate medical attention is required. Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes.

Eye contact

Immediate medical attention is required. Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Keep eye wide open while rinsing. Do not rub affected area.

Ingestion

Immediate medical attention is required. Do NOT induce vomiting. Drink plenty of water. Never give anything by mouth to an unconscious person. Remove from exposure, lie down. Clean mouth with water and drink afterwards plenty of water. Call a physician or poison control center immediately.

Immediate Medical Attention

Immediate medical attention is required.

Medical Treatment

Product is a corrosive material. Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

Unsuitable media

None known. Do not use a solid water stream as it may scatter and spread fire.

Specific hazards

The product causes burns of eyes, skin and mucous membranes. Thermal decomposition can lead to release of irritating and toxic gases and vapors. In the event of fire and/or explosion do not breathe fumes.

Firefighter Protection

As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Evacuate personnel to safe areas. Use personal protective equipment as required. Avoid contact with skin, eyes or clothing. Keep people away from and upwind of spill/leak.

Environmental

Do not allow into any sewer, on the ground or into any body of water. Should not be released into the environment. Prevent further leakage or spillage if safe to do so. Prevent product from entering drains.

Cleanup methods

Soak up with inert absorbent material. Take up mechanically, placing in appropriate containers for disposal. Clean contaminated surface thoroughly. After cleaning, flush away traces with water.

Materials: inert absorbent material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Use personal protective equipment as required. Avoid contact with skin, eyes or clothing. Ensure adequate ventilation, especially in confined areas. In case of insufficient ventilation, wear suitable respiratory equipment. Use only with adequate ventilation and in closed systems.

Storage

Keep container tightly closed in a dry and well-ventilated place. Keep out of the reach of children. Keep containers tightly closed in a dry, cool and well-ventilated place. Keep in properly labeled containers.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Showers, Eyewash stations, Ventilation systems.

Hands

Rubber gloves.

Eyes

Tight sealing safety goggles. Face protection shield.

Respiratory

If exposure limits are exceeded or irritation is experienced, NIOSH/MSHA approved respiratory protection should be worn. Positive-pressure supplied air respirators may be required for high airborne contaminant concentrations. Respiratory protection must be provided in accordance with current local regulations.

Skin/Body

Rubber gloves.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Boiling Point
101 °C / 214 °F
Odor Threshold
No information available
Solubility In Water
Soluble in water
Odor
Pleasant
Vapor Density
No information available
Decomposition Temperature
No information available
Auto Ignition Temperature
No information available
Upper Explosive Limit
No information available
Freezing Point
---
Relative Density
1.01
Lower Explosive Limit
No information available
Evaporation Rate
No information available
Physical State
Liquid
Crystallisation Point
---
Softening Point
No information available
Relative Evaporation Rate
---
Physical State Data
liquid
Colour Intensity
---
Density
No information available
Appearance
aqueous solution
Molecular Weight
No information available
State Under Standard Conditions
---
Colour
colorless
Solidification Point
---
Melting Point
No information available
Metal Corrosion
---
Ph
12.5 - 13.0
Cloud Point
---
Properties Status
---
Kinematic Viscosity
No information available
Flash Point
> 93 °C / > 200 °F
Vapor Pressure
No information available
Bulk Density
No information available
Solubility
---
Partition Coefficient
No information available
Form
---
Dynamic Viscosity
No information available
Flammability
No information available
Solubility In Fat
---
Explosive Limits
---
Voc Content
0.21
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions.

Reactivity

Stable under normal conditions

Hazardous reactions

None under normal processing.

Avoid

Extremes of temperature and direct sunlight. Do not mix with other chemicals. Exposure to air or moisture over prolonged periods.

Incompatible

Incompatible with strong acids and bases. Incompatible with oxidizing agents. Ammonia. Chlorine bleach. Do not mix with other chemicals. Aluminum.

Decomposition

Thermal decomposition can lead to release of irritating and toxic gases and vapors.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN3266
Shipping Name
Corrosive liquid, basic, inorganic, n.o.s. (sodium hydroxide)
Transport Class
8
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for GREASED LIGHTNING CLASSIC CLEANER & DEGREASER (SUPER STRENGTH)?

The signal word is danger.

What is the physical form of GREASED LIGHTNING CLASSIC CLEANER & DEGREASER (SUPER STRENGTH)?

GREASED LIGHTNING CLASSIC CLEANER & DEGREASER (SUPER STRENGTH) is a liquid appearing as aqueous solution with colorless color. It has pleasant odor.

What is GREASED LIGHTNING CLASSIC CLEANER & DEGREASER (SUPER STRENGTH) used for?

Consumer use.

What are the hazard statements for GREASED LIGHTNING CLASSIC CLEANER & DEGREASER (SUPER STRENGTH)?

This substance has 3 hazard statements:

  • H290: May be corrosive to metals
  • H315: Causes skin irritation
  • H318: Causes serious eye damage

What is the melting point of GREASED LIGHTNING CLASSIC CLEANER & DEGREASER (SUPER STRENGTH)?

The melting point is No information available and the boiling point is 101 °C / 214 °F.