NextSDS Logo
Safety Data Sheet EN

SuperClean Degreaser and Foaming Degreaser

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
SuperClean Degreaser and Foaming Degreaser
Synonyms
Cleaning Solution

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

S

SuperClean Brands, LLC

manufacturer

1380 Corporate Center Curve, Suite 107, Eagan, MN 55121

1-651-365-7500

Emergency Contacts

Emergency Contact

1-800-424-9300

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Met. Corr. Cat. 1
Skin Irrit. Cat. 2
Eye Irrit. Cat. 2A

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

Hazard Statements

H315 Causes skin irritation.
H319 Causes eye irritation.
Corrosive to metals

Precautionary Statements

P264 Wash hands thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P280 Wear protective gloves.
P280 Wear eye protection such as goggles or safety glasses with side shields.
P301 + P310 If swallowed: Immediately call a poison center/physician.
P302 + P352 If on Skin: Wash with plenty of soap and water.
P305 + P351 + P338 If in eyes: Rinse cautiously with water for 15 minutes.
P330 Rinse mouth.
P332 + P313 If skin irritation occurs get medical advice/attention.
P337 + P313 If eye irritation persists get medical advice/attention.
P338 Remove contact lenses, if present and easy to do. Continue rinsing.
P362 + P364 Take off contaminated clothing and wash before reuse.
P390 Absorb spillage to prevent material damage.
P406 Store in corrosive resistant container with inner liner.
P501 Dispose of contents/container in accordance with local, state, federal or international regulations.
Keep only in original container.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Sodium Metasilicate 6834-92-0 5% No
Sodium hydroxide 1310-73-2 5% No
Surfactant, blend --- 1 - 10% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If inhaled remove victim to fresh air and keep at rest. Call a poison center or physician if you feel unwell.

Skin contact

Wash with plenty of soap and water. Take off contaminated clothing and wash before reuse. If skin irritation occurs, get medical advice/attention.

Symptoms: Causes skin irritation.

Eye contact

If product gets in eyes flush with water for at least 15 minutes. If eye irritation persists, seek medical advice/attention.

Symptoms: Causes eye irritation.

Ingestion

Do NOT induce vomiting unless instructed by medical personal. Never give anything by mouth to an unconscious person. Get medical attention.

Symptoms: Ingestion may cause gastrointestinal irritation, nausea, vomiting, diarrhea and burns to the mouth, throat and esophagus.

Immediate Medical Attention

Get medical attention.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water fog, Carbon dioxide, Dry chemical, Foam.

Unsuitable media

Not available.

Specific hazards

None known.

Firefighter Protection

Firefighters should wear proper protective equipment (Bunker gear) and self-contained breathing apparatus with full face operated in positive pressure mode.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Keep people away from and upwind of spill/leak. Restrict access to area until completion of clean-up.

Environmental

If possible, prevention measures should be taken to stop any chemical from entering the ground water system.

Cleanup methods

Scoop up material and place into suitable container(s).

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves and eye/face protection. Avoid prolonged contact with skin, eyes and clothing. Keep away from heat. Keep container tightly closed.

Storage

Store in cool, dry and well ventilated place. Containers should be clearly identified, clear of obstructions and accessible only to authorized personnel.

Fire prevention

Keep away from heat. Have appropriate fire extinguishers/sprinkler system in place.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Use in well ventilated area. Apply technical measures to comply with occupational exposure limits if needed.

Hands

Wear protective gloves.

Eyes

Goggles or safety glasses with side shields.

Respiratory

If airborne concentrations are above the permissible exposure limit, use NIOSH approved respirators.

Skin/Body

Where extensive exposure to the product is possible, use resistant apron/suit and boots.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
Clear light purple liquid.
Colour
---
Colour Intensity
---
Form
---
Odor
Citrus Odor
Odor Threshold
---
Ph
12.5 -13.8
Melting Point
~ -3C (26.6F)
Boiling Point
>100C (212F)
Flash Point
>93.3C (199.4F)
Freezing Point
~ -3C (26.6F)
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
---
Vapor Density
---
Relative Density
1.00 – 1.05
Bulk Density
---
Density
---
Flammability
---
Upper Explosive Limit
---
Lower Explosive Limit
---
Explosive Limits
---
Auto Ignition Temperature
---
Decomposition Temperature
---
Solubility
---
Partition Coefficient
---
Solubility In Water
Complete.
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Reactivity

Not normally reactive.

Hazardous reactions

Hazardous polymerization does not occur.

Avoid

Heat. Contact with incompatible materials.

Incompatible

Strong oxidizers, Strong acids. Avoid contact with glass.

Decomposition

Carbon oxides.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN3266
Shipping Name
Corrosive liquid, basic, inorganic, N.O.S., (sodium hydroxide, sodium metasilicate).
Transport Class
8
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is SuperClean Degreaser and Foaming Degreaser known by?

SuperClean Degreaser and Foaming Degreaser is also known as: Cleaning Solution

What is the hazard signal word for SuperClean Degreaser and Foaming Degreaser?

The signal word is warning.

What is the physical form of SuperClean Degreaser and Foaming Degreaser?

SuperClean Degreaser and Foaming Degreaser is a liquid appearing as clear light purple liquid. . It has citrus odor odor.

What are the hazard statements for SuperClean Degreaser and Foaming Degreaser?

This substance has 3 hazard statements:

  • H315: Causes skin irritation.
  • H319: Causes eye irritation.
  • Corrosive to metals

What is the melting point of SuperClean Degreaser and Foaming Degreaser?

The melting point is ~ -3C (26.6F) and the boiling point is >100C (212F).