NextSDS Logo
Safety Data Sheet EN

HP Color LaserJet W2313A Magenta Print Cartridge

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
HP Color LaserJet W2313A Magenta Print Cartridge
Product Code
W2313A

Regulatory Identifiers

CAS Number
N/A

Identified Uses

This product is a magenta toner preparation that is used in HP Color LaserJet Pro M155a, M155nw, Pro MFP M182n, Pro MFP M182nw, Pro MFP M183fw series printers.

Uses advised against

None known.

Manufacturers & Suppliers

H

HP Inc.

manufacturer

1501 Page Mill Road, Palo Alto, CA 94304-1112, United States

650-857-1501

H

HP Inc. Customer Care Line

manufacturer

1-800-474-6836

H

HP Inc. Customer Care Line

manufacturer

1-208-323-2551

Emergency Contacts

HP Inc. health effects line

1-800-457-4209

HP Inc. health effects line

1-760-710-0048

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified
Not Classified
Not Classified
Not Classified

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Water 7732-18-5 15% No
Wax --- 7.5% No

Material name: W2313A 15192 Version #: 08 Revision date: 27-Sep-2025 Issue date: 03-Jul-2020 SDS US

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move person to fresh air immediately. If irritation persists, consult a physician.

Skin contact

Wash affected areas thoroughly with mild soap and water. Get medical attention if irritation develops or persists.

Eye contact

Do not rub eyes. Immediately flush with large amounts of clean, warm water (low pressure) for at least 15 minutes or until particles are removed. If irritation persists, consult a physician.

Ingestion

Rinse mouth out with water. Drink one to two glasses of water. If symptoms occur, consult a physician.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

CO2, water, or dry chemical

Unsuitable media

None known.

Specific hazards

Like most organic material in powder form, toner can form explosive dust-air mixtures when finely dispersed in air.

Instructions

If fire occurs in the printer, treat as an electrical fire.

Firefighter Protection

Not available.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

Do not flush into surface water or sanitary sewer system. See also section 13 Disposal considerations.

Cleanup methods

Slowly vacuum or sweep the material into a bag or other sealed container. Clean remainder with a damp cloth or vacuum cleaner.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Keep out of the reach of children. Avoid inhalation of dust and contact with skin and eyes. Use with adequate ventilation. Keep away from excessive heat, sparks, and open flames.

Storage

Keep out of the reach of children. Keep tightly closed and dry. Store at room temperature. Store away from strong oxidizers.

Fire prevention

Keep away from excessive heat, sparks, and open flames.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Use in a well ventilated area. No exposure limits noted for ingredient(s).

Hands

No personal hand protective equipment required under normal conditions of use.

Eyes

No personal eye/face protective equipment required under normal conditions of use.

Respiratory

No personal respiratory protective equipment required under normal conditions of use.

Skin/Body

Not available.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Flash Point
Not applicable
Softening Point
176 - 266 °F (80 - 130 °C)
Density
---
Appearance
Fine powder
Flammability
---
Evaporation Rate
Not applicable
Metal Corrosion
---
Solidification Point
---
Partition Coefficient
Not available.
Freezing Point
Not available.
Melting Point
Not available.
Colour
Magenta
Upper Explosive Limit
Not available.
Cloud Point
---
State Under Standard Conditions
---
Ph
Not applicable
Auto Ignition Temperature
Not applicable
Properties Status
---
Odor Threshold
Not available.
Form
solid
Solubility In Fat
---
Solubility
Negligible in water. Partially soluble in toluene and xylene.
Molecular Weight
---
Bulk Density
---
Voc Content
---
Boiling Point
Not applicable
Colour Intensity
---
Crystallisation Point
---
Decomposition Temperature
>392 °F (>200 °C)
Physical State
Liquid.
Dynamic Viscosity
---
Solubility In Water
Negligible in water.
Vapor Pressure
---
Physical State Data
solid
Explosive Limits
---
Odor
Slight plastic odor
Vapor Density
Not applicable
Relative Density
1 - 1.2
Kinematic Viscosity
---
Relative Evaporation Rate
---
Lower Explosive Limit
Not flammable
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal storage conditions.

Reactivity

Not available.

Hazardous reactions

Will not occur.

Avoid

Imaging Drum: Exposure to light

Incompatible

Strong oxidizers

Decomposition

Carbon monoxide and carbon dioxide.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for HP Color LaserJet W2313A Magenta Print Cartridge?

The signal word is no signal word.

What is the physical form of HP Color LaserJet W2313A Magenta Print Cartridge?

HP Color LaserJet W2313A Magenta Print Cartridge is a liquid. appearing as fine powder with magenta color. It has slight plastic odor odor.

What is the solubility of HP Color LaserJet W2313A Magenta Print Cartridge?

Negligible in water. Partially soluble in toluene and xylene.

What is HP Color LaserJet W2313A Magenta Print Cartridge used for?

This product is a magenta toner preparation that is used in HP Color LaserJet Pro M155a, M155nw, Pro MFP M182n, Pro MFP M182nw, Pro MFP M183fw series printers.

What is the melting point of HP Color LaserJet W2313A Magenta Print Cartridge?

The melting point is Not available. and the boiling point is Not applicable.