NextSDS Logo
Safety Data Sheet EN

HP Color LaserJet W2311A Cyan Print Cartridge

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
HP Color LaserJet W2311A Cyan Print Cartridge
Product Code
W2311A

Regulatory Identifiers

CAS Number
N/A

Identified Uses

This product is a cyan toner preparation that is used in HP Color LaserJet Pro M155a, M155nw, Pro MFP M182n, Pro MFP M182nw, Pro MFP M183fw series printers.

Uses advised against

None known.

Manufacturers & Suppliers

H

HP Inc.

manufacturer

1501 Page Mill Road, Palo Alto, CA 94304-1112, United States

650-857-1501

Emergency Contacts

HP Inc. health effects line (Toll-free within the US)

1-800-457-4209

HP Inc. health effects line (Direct)

1-760-710-0048

HP Inc. Customer Care Line (Toll-free within the US)

1-800-474-6836

HP Inc. Customer Care Line (Direct)

1-208-323-2551

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Hazard Statements

Not available.

Precautionary Statements

Not available.
Not available.
Not available.
Not available.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Water 7732-18-5 20% No
Wax --- 7.5% No

Material name: W2311A

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move person to fresh air immediately. If irritation persists, consult a physician.

Skin contact

Wash affected areas thoroughly with mild soap and water. Get medical attention if irritation develops or persists.

Eye contact

Do not rub eyes. Immediately flush with large amounts of clean, warm water (low pressure) for at least 15 minutes or until particles are removed. If irritation persists, consult a physician.

Ingestion

Rinse mouth out with water. Drink one to two glasses of water. If symptoms occur, consult a physician.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

CO2, water, or dry chemical

Unsuitable media

None known.

Specific hazards

Like most organic material in powder form, toner can form explosive dust-air mixtures when finely dispersed in air.

Instructions

If fire occurs in the printer, treat as an electrical fire.

Firefighter Protection

Not available.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Minimize dust generation and accumulation.

Environmental

Do not flush into surface water or sanitary sewer system. See also section 13 Disposal considerations.

Cleanup methods

Slowly vacuum or sweep the material into a bag or other sealed container. Clean remainder with a damp cloth or vacuum cleaner.

Materials: bag or other sealed container, damp cloth

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Keep out of the reach of children. Avoid inhalation of dust and contact with skin and eyes. Use with adequate ventilation. Keep away from excessive heat, sparks, and open flames.

Storage

Keep out of the reach of children. Keep tightly closed and dry. Store at room temperature.

Fire prevention

Keep away from excessive heat, sparks, and open flames.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Use in a well ventilated area.

Hands

No personal hand protective equipment required under normal conditions of use.

Eyes

No personal eye/face protective equipment required under normal conditions of use.

Respiratory

No personal respiratory protective equipment required under normal conditions of use.

Skin/Body

Not available.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Colour Intensity
---
Kinematic Viscosity
---
Solubility In Water
Negligible in water. Partially soluble in toluene and xylene.
Crystallisation Point
---
Freezing Point
---
Softening Point
176 - 266 °F (80 - 130 °C)
Form
---
Ph
Not applicable
Voc Content
---
Odor
Slight plastic odor
Physical State
Liquid.
Explosive Limits
---
Lower Explosive Limit
Not flammable
Solidification Point
---
Evaporation Rate
Not applicable
Flash Point
Not applicable
Solubility In Fat
---
Vapor Pressure
---
Cloud Point
---
Boiling Point
Not applicable
Physical State Data
solid
Properties Status
---
Vapor Density
Not applicable
Bulk Density
---
Decomposition Temperature
>392 °F (>200 °C)
Melting Point
Not available.
Density
---
Dynamic Viscosity
---
Relative Density
1 - 1.2
Upper Explosive Limit
Not available.
State Under Standard Conditions
---
Solubility
---
Relative Evaporation Rate
---
Auto Ignition Temperature
Not applicable
Molecular Weight
---
Partition Coefficient
Not available.
Flammability
Not available.
Metal Corrosion
---
Colour
Cyan
Appearance
Fine powder
Odor Threshold
Not available.
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal storage conditions.

Reactivity

Not available.

Hazardous reactions

Will not occur.

Avoid

Imaging Drum: Exposure to light

Incompatible

Strong oxidizers

Decomposition

Carbon monoxide and carbon dioxide.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for HP Color LaserJet W2311A Cyan Print Cartridge?

The signal word is no signal word.

What is the physical form of HP Color LaserJet W2311A Cyan Print Cartridge?

HP Color LaserJet W2311A Cyan Print Cartridge is a liquid. appearing as fine powder with cyan color. It has slight plastic odor odor.

What is HP Color LaserJet W2311A Cyan Print Cartridge used for?

This product is a cyan toner preparation that is used in HP Color LaserJet Pro M155a, M155nw, Pro MFP M182n, Pro MFP M182nw, Pro MFP M183fw series printers.

What are the hazard statements for HP Color LaserJet W2311A Cyan Print Cartridge?

This substance has 1 hazard statement:

  • Not available.

What is the melting point of HP Color LaserJet W2311A Cyan Print Cartridge?

The melting point is Not available. and the boiling point is Not applicable.