NextSDS Logo
Safety Data Sheet EN

Probio San

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Probio San
Product Form
Mixture
Product Code
GSP 41110

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Cleaning/washing agents and additives

Uses advised against

No additional information available

Manufacturers & Suppliers

G

Greenspeed B.V. B.V.

manufacturer

P.O.Box 1250, 2280CG Rijswijk, Nederland

Emergency Contacts

National Poisons Information Centre Beaumont Hospital

+353 1 809 2566

24/7

National Poisons Information Centre Beaumont Hospital

+353 1 809 2166

8am - 10pm, 7/7

Israel Poison Information Center Rambam Health Care Campus

+972 4 854 1900

National Poisons Information Service (Birmingham Centre) City Hospital

0344 892 0111

National Poisons Information Service (Cardiff Centre) University Hospital Llandough

0344 892 0111

National Poisons Information Service (Edinburgh Centre) Royal Infirmary of Edinburgh

0344 892 0111

Guy's & St Thomas' Poisons Unit Medical Toxicology Unit, Guy's & St Thomas' Hospital Trust

+44 20 7188 7188

National Poisons Information Service (Newcastle Centre) Regional Drugs and Therapeutics Centre

0344 892 0111

National Poisons Information Service (Belfast Centre) Royal Victoria Hospital

0344 892 0111

NHS 111/NHS 24/NHS Direct

111

NHS 111/NHS 24/NHS Direct

0845 4647

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Sodium Lauryl Ether Sulphate EC: 500-234-8 68891-38-3 1 - 5% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

No particular/specific measures required.

Skin contact

No particular/specific measures required.

Eye contact

No particular/specific measures required.

Ingestion

No particular/specific measures required.

Immediate Medical Attention

Treat symptomatically.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray. Dry powder. Foam. Carbon dioxide.

Specific hazards

Fire hazard : Not flammable.

Firefighter Protection

Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Ventilate spillage area.

Environmental

Not applicable.

Cleanup methods

Clean contaminated surfaces with an excess of water.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Ensure good ventilation of the work station.

Storage

Store in a well-ventilated place. Keep cool.

Hygiene

Do not eat, drink or smoke when using this product. Always wash hands after handling the product.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Not necessary under the recommended storage and handling conditions.

Hands

Not necessary under the recommended storage and handling conditions

Eyes

Not necessary under the recommended storage and handling conditions

Respiratory

Not necessary under the recommended storage and handling conditions

Skin/Body

Not necessary under the recommended storage and handling conditions

Environmental

No additional information available

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Form
---
Boiling Point
100 – 245 °C
Crystallisation Point
---
Decomposition Temperature
Not available
Bulk Density
---
Melting Point
Not applicable
Freezing Point
Not available
Relative Evaporation Rate
≈ 1
Lower Explosive Limit
Not available
Voc Content
11,465 g/l
Molecular Weight
---
Solidification Point
---
Evaporation Rate
---
Flash Point
Not available
Metal Corrosion
---
Relative Density
Not available
Ph
≈ 7
Properties Status
---
Physical State
Liquid
Kinematic Viscosity
Not available
Physical State Data
liquid
Odor
characteristic.
Explosive Limits
---
Dynamic Viscosity
---
Solubility
Not available
Solubility In Fat
---
Colour Intensity
---
Colour
red.
Upper Explosive Limit
Not available
Auto Ignition Temperature
Not available
Density
Not available
Cloud Point
---
State Under Standard Conditions
---
Vapor Pressure
Not available
Softening Point
---
Flammability
Not applicable
Vapor Density
---
Odor Threshold
Not available
Partition Coefficient
Not available
Solubility In Water
---
Appearance
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Reactivity

The product is non-reactive under normal conditions of use, storage and transport.

Hazardous reactions

No dangerous reactions known under normal conditions of use.

Avoid

None under recommended storage and handling conditions (see section 7).

Incompatible

No additional information available

Decomposition

Under normal conditions of storage and use, hazardous decomposition products should not be produced.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Probio San?

The signal word is no signal word.

What is the physical form of Probio San?

Probio San is a liquid with red. color. It has characteristic. odor.

What is the solubility of Probio San?

Not available

What is Probio San used for?

Cleaning/washing agents and additives

What is the melting point of Probio San?

The melting point is Not applicable and the boiling point is 100 – 245 °C.