Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Probio Tab San
- Product Code
- 4003644 4003641 295516
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- 6H00-50Q3-M00S-T0QK
Identified Uses
/
Uses advised against
/
Manufacturers & Suppliers
Greenspeed
P.O.Box 1250, 2280 CG Rijswijk (ZH), NL
+31703458737
http://www.greenspeed.eu/
Emergency Contacts
Emergency Contact
+32 70 245 245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Citric Acid EC: 201-069-1 | 77-92-9 | 60% | Yes |
| Sodiumlaurylsulphate EC: 287-809-4 | 85586-07-8 | 4% | Yes |
| Linalyl acetate EC: 204-116-4 | 115-95-7 | 0.3% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
In case of serious or continuous discomforts: remove to fresh air and seek medical attention.
Symptoms: Sore throat, cough
Rinse with water.
Rinse first with plenty of water, if necessary seek medical attention.
Symptoms: Redness
Rinse first with plenty of water, if necessary seek medical attention.
Symptoms: Diarrhoea, headache, abdominal cramps, sleepiness, vomiting
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, foam, powder, sprayed water
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not walk into or touch spilled substances and avoid inhalation of fumes, smoke, dusts and vapours by staying up wind. Remove any contaminated clothing and used contaminated protective equipment and dispose of it safely.
Do not allow to flow into sewers or open water.
If possible, remove by using absorbent material.
Materials: absorbent material
Related Products
Similar products with comparable safety profiles
Probio Tab San
UFI: 6H00-50Q3-M00S-T0QK
Probio Tab San
UFI: 6H00-50Q3-M00S-T0QK
295546 295547 Probio Tab San
UFI: 6H00-50Q3-M00S-T0QK
Probio San
---
Probio Tab Floor
UFI: 1330-C0E0-T00M-N86H
Probio Tab Floor
UFI: 1330-C0E0-T00M-N86H
4003631_Probio Tab Multi
UFI: PF00-P00Q-A008-4P4H
295515_Probio Tab Multi
UFI: PF00-P00Q-A008-4P4H
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle with care to avoid spillage.
Keep in a sealed container in a closed, frost-free, ventilated room.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
The level of protection and types of controls necessary will vary depending upon potential exposure conditions. Adequate ventilation should be provided so that exposure limits are not exceeded. For further information, check section 7.
Handling with nitril-gloves (EN 374). Breakthrough time: >480' Material thickness: 0,35 mm. Thoroughly check gloves before use. Take of the gloves properly without touching the outside with your bare hands. The manufacturer of the protective gloves has to be consulted about the suitability for a specific work station. Wash and dry your hands.
Keep an eye-rinse bottle within reach. Tight-fitting safety goggles. Wear a face shield and protective suit in case of exceptional processing problems.
If necessary, use an air-purifying face mask in case of respiratory hazards.
Wear impermeable clothing. The type of protective equipment depends on the concentration and amount of hazardous substances at the work station in question.
Comply with applicable environmental regulations limiting discharge to air, water and soil. Protect the environment by applying appropriate control measures to prevent or limit emissions. For further information, check sections 6 and 13.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Extremely high or low temperatures.
Stable under normal conditions.
Protect from sunlight and do not expose to temperatures exceeding + 50°C.
Acids, alkalines, oxidants, reductants
Under recommended usage conditions, hazardous decomposition products are not expected.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Probio Tab San?
The signal word is warning.
What is the physical form of Probio Tab San?
Probio Tab San is a solid with white color. It has characteristic odor.
What is Probio Tab San used for?
/
What are the hazard statements for Probio Tab San?
This substance has 2 hazard statements:
- H319: Causes serious eye irritation.
- H335: May cause respiratory irritation.