RoClean L211f

If breathing is irregular or stopped, immediately seek medical assistance and start first aid actions. In case of respiratory tract irritation, consult a physician. Provide fresh air.

Rinse skin with water/shower. Take off contaminated clothing. After contact with skin, wash immediately with plenty of water. If skin irritation occurs: Get medical advice/attention.

Remove contact lenses, if present and easy to do. Continue rinsing. Irrigate copiously with clean, fresh water for at least 10 minutes, holding the eyelids apart. Call a physician immediately.

Symptoms: Splashes cause strong tearing, pain, may cause permanent visual impairment.

Rinse mouth with water (only if the person is conscious). Do NOT induce vomiting.

Water spray, Alcohol resistant foam, BC-powder, Carbon dioxide (CO2)

Water jet

In case of fire and/or explosion do not breathe fumes. Co-ordinate firefighting measures to the fire surroundings. Fight fire with normal precautions from a reasonable distance.

Remove persons to safety.

Keep away from drains, surface and ground water. Retain contaminated washing water and dispose of it.

Wipe up with absorbent material (e.g. cloth, fleece). Collect spillage: sawdust, kieselgur (diatomite), sand, universal binder

Materials: cloth, fleece, sawdust, kieselgur (diatomite), sand, universal binder

Use local and general ventilation. Use only in well-ventilated areas.

Keep only in original container.

Wash hands after use. Do not eat, drink and smoke in work areas. Remove contaminated clothing and protective equipment before entering eating areas. Never keep food or drink in the vicinity of chemicals. Never place chemicals in containers that are normally used for food or drink. Keep away from food, drink and animal feedingstuffs.

General ventilation.

Wear suitable gloves. Chemical protection gloves are suitable, which are tested according to EN 374. Check leak-tightness/impermeability prior to use. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. In case of spray contact at least protection index 2 recommended, according to more than 30 min. penetration time (EN 374). Layer thickness of gloves at least: 0.4 mm. In case of prolonged and intensive contact protection index 6 recommended, according to more than 480 min. penetration time (EN 374). Layer thickness of gloves at least: 0.7 mm. Type of material: PVC: polyvinyl chloride, PE: polyethylene, CR: chloroprene (chlorobutadiene) rubber, NBR: acrylonitrile-butadiene rubber, IIR: isobutene-isoprene (butyl) rubber, FKM: fluoro-elastomer. Breakthrough times of the glove material: Breakthrough times and swelling properties of the material must be taken into consideration

Wear eye/face protection.

Not necessary under normal conditions and provided good general ventilation. In case of inadequate ventilation wear respiratory protection.

Chemical resistant protective clothing.

Use appropriate container to avoid environmental contamination. Keep away from drains, surface and ground water.

The material is stable under normal ambient and anticipated storage and handling conditions of temperature and pressure.

This material is not reactive under normal ambient conditions.

No known hazardous reactions.

There are no specific conditions known which have to be avoided.

Oxidisers

Reasonably anticipated hazardous decomposition products produced as a result of use, storage, spill and heating are not known. Hazardous combustion products: see section 5.