NextSDS Logo
Safety Data Sheet EN

RTV 108

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
RTV 108
Synonyms
ACETOXY SEALANT (translucent)

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Silicone Elastomer

Uses advised against

For industrial use only.

Manufacturers & Suppliers

M

Momentive Performance Materials USA LLC

manufacturer

2750 Balltown Road, Niskayuna, NY 12309

+1-800-295-2392

Emergency Contacts

CHEMTREC

1-800-424-9300

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Repr. Cat. 2

GHS Pictograms

GHS08 - Serious health hazard

GHS08

Hazard Statements

H361f Suspected of damaging fertility.

Precautionary Statements

P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P281 Use personal protective equipment as required.
P308 + P313 IF exposed or concerned: Get medical advice/attention.
P405 Store locked up.
P501 Dispose of contents/ container to an approved facility in accordance with local, regional, national and international regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Octamethylcyclotetrasiloxane 556-67-2 1 - 3% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If inhaled, remove to fresh air. If not breathing give artificial respiration using a barrier device. If breathing is difficult give oxygen. Get medical attention.

Skin contact

Wash with soap and water.

Eye contact

In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

Ingestion

If swallowed, do NOT induce vomiting. Give a glass of water. Do not give victim anything to drink if he is unconscious. Get medical attention.

Immediate Medical Attention

Get medical attention.

Medical Treatment

Treatment is symptomatic and supportive.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

All standard extinguishing agents are suitable.

Unsuitable media

Do not use water jet.

Specific hazards

In case of fire, carbon monoxide and carbon dioxide may be formed. Acute overexposure to the products of combustion may result in irritation of the respiratory tract. Pay attention to the corrosive effects arising from contact with water.

Instructions

Use water spray to keep fire-exposed containers cool.

Firefighter Protection

Firefighters must wear NIOSH/MSHA approved positive pressure self-contained breathing apparatus with full face mask and full protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Avoid contact with eyes, skin, and clothing. Use only in well-ventilated areas. Avoid accidental ingestion of this material. Wash hands and face before eating, drinking, smoking, using toilet facilities, or applying cosmetics. Remove contact lenses before using sealant. Do not handle lenses until all sealant has been cleaned from the finger and hands. Keep out of reach of children. Keep container closed. May generate formaldehyde at temperatures greater than 150 C(300 F).

Cleanup methods

Wipe, scrape or soak up in an inert material and put in a container for disposal. Wash walking surfaces with detergent and water to reduce slipping hazard.

Materials: inert material, detergent and water

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Wear appropriate personal protective equipment. Use only in well-ventilated areas. Keep away from food, drink and animal feeding stuffs. When using do not eat, drink or smoke. Keep containers tightly closed.

Storage

Keep container tightly closed in a cool, well-ventilated place.

Hygiene

Keep away from food, drink and animal feeding stuffs. When using do not eat, drink or smoke.

Fire prevention

Sensitivity to static discharge is not expected.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Provide adequate general and local exhaust ventilation. Eye washes and showers for emergency use.

Hands

Butyl rubber gloves are recommended.

Eyes

Safety glasses with side shields

Respiratory

If inhalation exposure is expected, NIOSH/MSHA approved respiratory protection should be worn. Supplied air respirators may be required for non-routine or emergency situations. Respiratory protection must be provided in accordance with OSHA regulations (see 29CFR 1910.134).

Skin/Body

Wear suitable protective clothing and eye/face protection.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
solid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Colorless
Colour Intensity
---
Form
Paste
Odor
Acetic acid.
Odor Threshold
No data available.
Ph
No data available.
Melting Point
No data available.
Boiling Point
Not applicable
Flash Point
>93.3 °C
Freezing Point
No data available.
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
No data available.
Vapor Pressure
No data available.
Vapor Density
---
Relative Density
1.06
Bulk Density
---
Density
ca. 1.06 g/cm3
Flammability
No data available.
Upper Explosive Limit
No data available.
Lower Explosive Limit
No data available.
Explosive Limits
---
Auto Ignition Temperature
No data available.
Decomposition Temperature
No decomposition if stored and applied as directed.
Solubility
---
Partition Coefficient
No data available.
Solubility In Water
Insoluble
Solubility In Fat
---
Molecular Weight
---
Voc Content
26 g/l
Metal Corrosion
---
Dynamic Viscosity
No data available.
Kinematic Viscosity
> 20.5 mm2/s (40 °C)
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Material is stable under normal conditions.

Reactivity

No dangerous reaction if used as recommended.

Hazardous reactions

Hazardous polymerization does not occur.

Avoid

Keep away from moisture. Reacts with water liberating small amounts of acetic acid.

Incompatible

Strong Acids, Strong Bases Water.

Decomposition

Carbon dioxide Silicon dioxide. Formaldehyde. Measurements at temperatures above 150°C in presence of air (oxygen) have shown that small amounts of formaldehyde are formed due to oxidative degradation.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is RTV 108 known by?

RTV 108 is also known as: ACETOXY SEALANT (translucent)

What is the hazard signal word for RTV 108?

The signal word is warning.

What is the physical form of RTV 108?

RTV 108 is a solid with colorless color. It has acetic acid. odor.

What is RTV 108 used for?

Silicone Elastomer

What are the hazard statements for RTV 108?

This substance has 1 hazard statement:

  • H361f: Suspected of damaging fertility.

What is the melting point of RTV 108?

The melting point is No data available. and the boiling point is Not applicable.