INDHP 1-GL 2PK ROCALK 7400 GLS SFTY ORN

Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get immediate medical attention. If you experience difficulty in breathing, leave the area to obtain fresh air. If continued difficulty is experienced, get medical assistance immediately.

Wash skin with soap and water. Remove contaminated clothing. Get medical attention if irritation develops or persists.

Immediately flush eyes with plenty of water for at least 15 minutes holding eyelids open. Get medical attention.

Get immediate medical attention. If swallowed, get medical attention.

Dry Chemical, Dry Sand, Water Fog

Closed containers may explode when exposed to extreme heat due to buildup of steam. Combustible liquid and vapor. Containers may explode when heated.

Water may be used to cool closed containers to prevent pressure buildup and possible autoignition or explosion. Evacuate area and fight fire from a safe distance. Use water spray to keep fire-exposed containers cool.

Contain spilled liquid with sand or earth. DO NOT use combustible materials such as sawdust. Remove all sources of ignition, ventilate area and remove with inert absorbent and non-sparking tools.

remove with inert absorbent and non-sparking tools

Materials: inert absorbent

Wash thoroughly after handling. Wash hands before eating. Remove contaminated clothing and launder before reuse. Use only with adequate ventilation. Follow all SDS and label precautions even after container is emptied because it may retain product residues. Avoid breathing fumes, vapors, or mist. Avoid contact with eyes, skin and clothing. Avoid contact with eyes.

Store in a dry, well ventilated place. Keep container tightly closed when not in use. Avoid excess heat.

Wash thoroughly after handling. Wash hands before eating. Remove contaminated clothing and launder before reuse.

Isolate from heat, electrical equipment, sparks and open flame. Keep away from heat, sparks, flame and sources of ignition.

Use process enclosures, local exhaust ventilation, or other engineering controls to control airborne levels below recommended exposure limits. Prevent build-up of vapors by opening all doors and windows to achieve cross-ventilation. Engineering Measures for Combustible Dust: No Information

Use impervious gloves to prevent skin contact and absorption of this material through the skin.

Use safety eyewear designed to protect against splash of liquids.

A respiratory protection program that meets OSHA 1910.134 and ANSI Z88.2 requirements must be followed whenever workplace conditions warrant a respirator's use. A NIOSH/MSHA approved air purifying respirator with an organic vapor cartridge or canister may be permissible under certain circumstances where airborne concentrations are expected to exceed exposure limits. Protection provided by air purifying respirators is limited. Use a positive pressure air supplied respirator if there is any potential for an uncontrolled release, exposure levels are not known, or in any other circumstances where air purifying respirators may not provide adequate protection.

Use impervious gloves to prevent skin contact and absorption of this material through the skin.

This product is stable under normal storage conditions.

Will not occur under normal conditions.

Avoid all possible sources of ignition.

Incompatible with strong oxidizing agents, strong acids and strong alkalies.

By open flame, carbon monoxide and carbon dioxide. When heated to decomposition, it emits acrid smoke and irritating fumes. Contains solvents which may form carbon monoxide, carbon dioxide, and formaldehyde.