NextSDS Logo
Safety Data Sheet EN

INDHP 1-GL 2PK ROCALK 7400 GLS SFTY BLU

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
INDHP 1-GL 2PK ROCALK 7400 GLS SFTY BLU
Product Code
925402

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Topcoat/Alkyd

Manufacturers & Suppliers

R

Rust-Oleum Corporation

manufacturer

11 Hawthorn Parkway, Vernon Hills, IL 60061 USA

R

Rust-Oleum Canada (ROCA)

distributor

200 Confederation Parkway, Concord, ON L4K 4T8 Canada

Emergency Contacts

Rust-Oleum Canada (ROCA)

800-387-3625

24 Hour Hotline

847-367-7700

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Carc. Cat. 1B H350
Flam. Liq. Cat. 3 H226
Muta. Cat. 1B H340
Repr. Cat. 1B H360
Skin Sens. Cat. 1 H317

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H226 Flammable liquid and vapor.
H317 May cause an allergic skin reaction.
H340 May cause genetic defects.
H350 May cause cancer.
H360 May damage fertility or the unborn child.

Precautionary Statements

P201 Obtain special instructions before use.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. NO SMOKING.
P233 Keep container tightly closed.
P240 Ground/bond container and receiving equipment.
P241 Use explosion-proof electrical/ventilating/lighting/equipment.
P242 Use only non-sparking tools.
P243 Take precautionary measures against static discharge.
P261 Avoid breathing dust/fume/gas/mist/vapors/spray.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/ shower.
P308 + P313 IF exposed or concerned: Get medical advice/attention.
P321 For specific treatment see label.
P333 + P313 If skin irritation or rash occurs: Get medical advice/attention.
P363 Wash contaminated clothing before reuse.
P370 + P378 In case of fire: Use alcohol film forming foam, carbon dioxide, dry chemical, dry sand to extinguish.
P403 + P235 Store in a well-ventilated place. Keep cool.
P405 Store locked up.
P501 Dispose of contents/container in accordance with local, regional and national regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Hydrotreated Light Distillate 64742-47-8 25 - 50% Yes
Titanium Dioxide 13463-67-7 2.5 - 10% No
Titanium Dioxide 1317-80-2 1 - 2.5% No
Xylenes (o-, m-, p- Isomers) 1330-20-7 0.1 - 1% Yes
Methyl Ethyl Ketoxime 96-29-7 0.1 - 1% Yes
Zirconium 2-Ethylhexanoate 22464-99-9 0.1 - 1% Yes
Naphtha, Hydrotreated Heavy 64742-48-9 0.1 - 1% Yes
Ethylbenzene 100-41-4 0.1 - 1% Yes
Cobalt 2-Ethylhexanoate 136-52-7 0.1 - 1% Yes
Zirconium Acetate 5153-24-2 0.1% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get immediate medical attention. If you experience difficulty in breathing, leave the area to obtain fresh air. If continued difficulty is experienced, get medical assistance immediately.

Skin contact

Wash skin with soap and water. Remove contaminated clothing. Get medical attention if irritation develops or persists.

Eye contact

Immediately flush eyes with plenty of water for at least 15 minutes holding eyelids open. Get medical attention.

Ingestion

Do not induce vomiting or give anything by mouth. Get immediate medical attention. If swallowed, get medical attention.

Symptoms: Aspiration hazard: this material can enter the lungs and cause severe lung damage.

Immediate Medical Attention

Get medical attention. Get immediate medical attention.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Alcohol Film Forming Foam, Carbon Dioxide, Dry Chemical, Water Fog

Specific hazards

Closed containers may explode when exposed to extreme heat due to buildup of steam. Combustible liquid and vapor. Containers may explode when heated.

Instructions

Water may be used to cool closed containers to prevent pressure buildup and possible autoignition or explosion. Evacuate area and fight fire from a safe distance. Use water spray to keep fire-exposed containers cool.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Contain spilled liquid with sand or earth. DO NOT use combustible materials such as sawdust. Remove all sources of ignition, ventilate area and remove with inert absorbent and non-sparking tools.

Cleanup methods

remove with inert absorbent and non-sparking tools

Materials: inert absorbent

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Wash thoroughly after handling. Wash hands before eating. Remove contaminated clothing and launder before reuse. Use only with adequate ventilation. Follow all SDS and label precautions even after container is emptied because it may retain product residues. Avoid breathing fumes, vapors, or mist. Avoid contact with eyes, skin and clothing. Avoid contact with eyes.

Storage

Store in a dry, well ventilated place. Keep container tightly closed when not in use. Keep containers tightly closed. Isolate from heat, electrical equipment, sparks and open flame. Keep away from heat, sparks, flame and sources of ignition. Keep container closed when not in use. Avoid excess heat.

Hygiene

Wash thoroughly after handling. Wash hands before eating. Remove contaminated clothing and launder before reuse.

Fire prevention

Isolate from heat, electrical equipment, sparks and open flame. Keep away from heat, sparks, flame and sources of ignition.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Use process enclosures, local exhaust ventilation, or other engineering controls to control airborne levels below recommended exposure limits. Prevent build-up of vapors by opening all doors and windows to achieve cross-ventilation. Engineering Measures for Combustible Dust: No Information

Hands

Use impervious gloves to prevent skin contact and absorption of this material through the skin.

Eyes

Use safety eyewear designed to protect against splash of liquids.

Respiratory

A respiratory protection program that meets OSHA 1910.134 and ANSI Z88.2 requirements must be followed whenever workplace conditions warrant a respirator's use. A NIOSH/MSHA approved air purifying respirator with an organic vapor cartridge or canister may be permissible under certain circumstances where airborne concentrations are expected to exceed exposure limits. Protection provided by air purifying respirators is limited. Use a positive pressure air supplied respirator if there is any potential for an uncontrolled release, exposure levels are not known, or in any other circumstances where air purifying respirators may not provide adequate protection.

Skin/Body

Use impervious gloves to prevent skin contact and absorption of this material through the skin.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Form
---
Auto Ignition Temperature
N.D.
Solubility In Water
Slight
Lower Explosive Limit
0.5 vol%
Decomposition Temperature
N.D.
Odor
Solvent Like
Melting Point
---
Solubility In Fat
---
Ph
N.A.
Softening Point
---
Dynamic Viscosity
---
Solubility
---
Physical State
Liquid
Cloud Point
---
Appearance
Liquid
Flammability
Supports Combustion
Bulk Density
---
Solidification Point
---
Partition Coefficient
N.D.
Vapor Pressure
N.D.
Freezing Point
N.D.
Explosive Limits
---
Relative Density
0.946
Molecular Weight
---
Metal Corrosion
---
Odor Threshold
N.E.
Relative Evaporation Rate
---
Voc Content
---
Upper Explosive Limit
6.6 vol%
Properties Status
---
Vapor Density
Heavier than Air
Flash Point
38 °C
Evaporation Rate
Slower than Ether
Boiling Point
136 - 1,649 °C
Colour
---
State Under Standard Conditions
---
Crystallisation Point
---
Density
---
Physical State Data
liquid
Kinematic Viscosity
---
Colour Intensity
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

This product is stable under normal storage conditions.

Hazardous reactions

Will not occur under normal conditions.

Avoid

Avoid all possible sources of ignition.

Incompatible

strong oxidizing agents, strong acids and strong alkalies.

Decomposition

By open flame, carbon monoxide and carbon dioxide. When heated to decomposition, it emits acrid smoke and irritating fumes. Contains solvents which may form carbon monoxide, carbon dioxide, and formaldehyde.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1263
Shipping Name
Paint
Transport Class
3
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for INDHP 1-GL 2PK ROCALK 7400 GLS SFTY BLU?

The signal word is danger.

What is the physical form of INDHP 1-GL 2PK ROCALK 7400 GLS SFTY BLU?

INDHP 1-GL 2PK ROCALK 7400 GLS SFTY BLU is a liquid appearing as liquid . It has solvent like odor.

What is INDHP 1-GL 2PK ROCALK 7400 GLS SFTY BLU used for?

Topcoat/Alkyd

What are the hazard statements for INDHP 1-GL 2PK ROCALK 7400 GLS SFTY BLU?

This substance has 5 hazard statements:

  • H226: Flammable liquid and vapor.
  • H317: May cause an allergic skin reaction.
  • H340: May cause genetic defects.
  • H350: May cause cancer.
  • H360: May damage fertility or the unborn child.