Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Simple Green® All-Purpose Cleaner
- Product Code
- Please refer to Section 16
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Cleaner & Degreaser for water tolerant surfaces.
Uses advised against
Do not use on non-rinseable surfaces.
Manufacturers & Suppliers
Sunshine Makers, Inc.
manufacturer
15922 Pacific Coast Highway, Huntington Beach, CA 92649 USA
800-228-0709
Emergency Contacts
Chem-Tel
800-255-3924
24-Hour
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Water | 7732-18-5 | 85% | No |
| Surfactant | --- | 5% | No |
| C9-11 Alcohols Ethoxylated | 68439-46-3 | 5% | No |
| Tetrasodium Glutamate Diacetate | 51981-21-6 | 2% | No |
| Sodium Bicarbonate | 144-55-8 | 1% | No |
| Hydrochloric Acid | 7647-01-0 | 1% | No |
| Fragrances | --- | 1% | No |
| Blend of Polyoxyalkylene Substituted Chromophores (Cyan and Yellow) | --- | 0.1% | No |
| Anethole | 104-46-1 | 0.1% | No |
| Eucalyptol | 470-82-6 | 0.1% | No |
| Methylchloroisothiazolinone | 26172-55-4 | 0.001% | No |
| Methylisothiazolinone | 2682-20-4 | 0.0001% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
If adverse effect occurs, move to fresh air.
Symptoms: Not expected to cause respiratory irritation.
If adverse effect occurs, rinse skin with water.
Symptoms: Not expected to cause skin irritation.
If adverse effect occurs, flush eyes with water.
Symptoms: Not expected to cause eye irritation.
Drink plenty of water to dilute.
Symptoms: May cause upset stomach.
Medical Treatment
Treat symptomatically
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use Dry chemical, CO2, water spray or "alcohol" foam.
Avoid high volume jet water.
In event of fire, fire created carbon oxides may be formed.
Firefighter Protection
Wear positive pressure self-contained breathing apparatus; Wear full protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
See section 8 – personal protection.
Do not allow into open waterways and ground water systems.
Dike or soak up with inert absorbent material.
Materials: inert absorbent material
Related Products
Similar products with comparable safety profiles
Simple Green® Industrial Cleaner & Degreaser
---
Original Pine-Sol® Multi-Surface Cleaner
---
Original Pine-Sol® Multi-Surface Cleaner
---
Quick Clean™ Safety Solvent and Degreaser
---
Lavender Clean® Pine-Sol® Multi-Surface Cleaner
---
Active Green cleaner tab
---
Active Green cleaner tab
UFI: HYGR-V6WC-C239-AN9Y
Surface Cleaner Spray
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure adequate ventilation. Keep out of reach of children. Keep away from heat, sparks, open flame and direct sunlight. Do not pierce any part of the container. Do not mix or contaminate with any other chemical. Do not eat, drink or smoke while using this product.
Keep container tightly closed. Keep in cool dry area. Avoid prolonged exposure to sunlight. Do not store at temperatures above 109°F (42.7°C). If separation occurs, mix the product for reconstitution.
Do not eat, drink or smoke while using this product.
Keep away from heat, sparks, open flame and direct sunlight.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Showers, eyewash stations, ventilation systems
Use protective gloves (any material) when used for prolonged periods or dermally sensitive.
Use protective glasses or safety goggles if splashing or spray-back is likely.
Use in well ventilated areas or local exhaust ventilations when cleaning small spaces.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions 70°F (21°C) and 14.7 psig (760 mmHg).
Non-reactive.
None known.
Excessive heat or cold.
Do not mix with oxidizers, acids, bathroom cleaners, or disinfecting agents.
Normal products of combustion - CO, CO2.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- Shipping Name
- Cleaning Compound, Liquid NOI
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Simple Green® All-Purpose Cleaner?
The signal word is no signal word.
What is the physical form of Simple Green® All-Purpose Cleaner?
Simple Green® All-Purpose Cleaner is a liquid appearing as green liquid with green color. It has added sassafras odor odor.
What is the solubility of Simple Green® All-Purpose Cleaner?
100% in water
What is Simple Green® All-Purpose Cleaner used for?
Cleaner & Degreaser for water tolerant surfaces.