NextSDS Logo
Safety Data Sheet EN

Ashless AW Hydraulic Fluid

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Ashless AW Hydraulic Fluid
Product Form
Mixture
Synonyms
Hydraulic Fluid

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Hydraulic Fluid

Manufacturers & Suppliers

Smitty's Supply, Inc. logo

Smitty's Supply, Inc.

manufacturer

PO BOX 530, Roseland, LA 70456

985-748-8214

http://www.smittysinc.net

Emergency Contacts

CHEMTREC

1-800-424-9300

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified

GHS Pictograms

Precautionary Statements

P273 Avoid release to the environment.
P501 Dispose of contents/container in accordance with local, regional, national, and international regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
heavy paraffinic, Distillates, petroleum, hydrotreated heavy paraffinic 64742-54-7 95 - 99.5% No

More than one of the ranges of concentration prescribed by Controlled Products Regulations has been used where necessary, due to varying composition.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove to fresh air and keep at rest in a position comfortable for breathing. Obtain medical attention if breathing difficulty persists.

Symptoms: Overexposure may be irritating to the respiratory system.

Skin contact

Remove contaminated clothing. Drench affected area with water or soap and water for at least 15 minutes. Wash contaminated clothing before reuse. Obtain medical attention if irritation develops or persists.

Symptoms: Repeated or prolonged skin contact may cause irritation.

Eye contact

Rinse cautiously with water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Obtain medical attention.

Symptoms: Direct contact with the eyes is likely irritating.

Ingestion

Do NOT induce vomiting. Rinse mouth. Immediately call a POISON CENTER or doctor/physician.

Symptoms: Ingestion is likely to be harmful or have adverse effects.

Immediate Medical Attention

If you feel unwell, seek medical advice (show the label where possible).

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use extinguishing media appropriate for surrounding fire.

Unsuitable media

Do not use a heavy water stream. Use of heavy stream of water may spread fire.

Specific hazards

Fire Hazard: Not flammable but will support combustion. Explosion Hazard: Product is not explosive. Reactivity: Hazardous reactions will not occur under normal conditions.

Instructions

Use water spray or fog for cooling exposed containers.

Firefighter Protection

Do not enter fire area without proper protective equipment, including respiratory protection.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Stop leak if safe to do so. Eliminate ignition sources. Ventilate area.

Environmental

Prevent entry to sewers and public waters.

Cleanup methods

Clean up spills immediately and dispose of waste safely. Transfer spilled material to a suitable container for disposal.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Any proposed use of this product in elevated-temperature processes should be thoroughly evaluated to assure that safe operating conditions are established and maintained. Practice good housekeeping - spillage can be slippery on smooth surface either wet or dry.

Storage

Store in a dry, cool and well-ventilated place. Keep container closed when not in use. Keep/Store away from direct sunlight, extremely high or low temperatures and incompatible materials.

Hygiene

Handle in accordance with good industrial hygiene and safety procedures. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Ensure adequate ventilation, especially in confined areas. Emergency eye wash fountains and safety showers should be available in the immediate vicinity of any potential exposure. Ensure all national/local regulations are observed.

Hands

Wear chemically resistant protective gloves.

Eyes

Chemical goggles or safety glasses.

Respiratory

Use a NIOSH-approved respirator or self-contained breathing apparatus whenever exposure may exceed established Occupational Exposure Limits.

Skin/Body

Wear suitable protective clothing. Materials for Protective Clothing: Chemically resistant materials and fabrics.

Environmental

Do not allow the product to be released into the environment.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
Amber
Colour
---
Colour Intensity
---
Form
---
Odor
Slight Hydrocarbon
Odor Threshold
Not available
Ph
Not available
Melting Point
Not available
Boiling Point
Not available
Flash Point
204C / 400C
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not available
Vapor Pressure
Not available
Vapor Density
---
Relative Density
0.85
Bulk Density
---
Density
---
Flammability
Not available
Upper Explosive Limit
Not available
Lower Explosive Limit
Not available
Explosive Limits
---
Auto Ignition Temperature
Not available
Decomposition Temperature
Not available
Solubility
Negligible
Partition Coefficient
Not available
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
Not available
Kinematic Viscosity
Not available
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended handling and storage conditions (see section 7).

Reactivity

Hazardous reactions will not occur under normal conditions.

Hazardous reactions

Hazardous polymerization will not occur.

Avoid

Direct sunlight, extremely high or low temperatures, heat, hot surfaces, sparks, open flames, incompatible materials, and other ignition sources.

Incompatible

Strong acids, strong bases, strong oxidizers.

Decomposition

No decomposition expected under normal use and storage conditions.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is Ashless AW Hydraulic Fluid known by?

Ashless AW Hydraulic Fluid is also known as: Hydraulic Fluid

What is the hazard signal word for Ashless AW Hydraulic Fluid?

The signal word is no signal word.

What is the physical form of Ashless AW Hydraulic Fluid?

Ashless AW Hydraulic Fluid is a liquid appearing as amber . It has slight hydrocarbon odor.

What is the solubility of Ashless AW Hydraulic Fluid?

Negligible

What is Ashless AW Hydraulic Fluid used for?

Hydraulic Fluid

What is the melting point of Ashless AW Hydraulic Fluid?

The melting point is Not available and the boiling point is Not available.