CAM2 PROMAX AW Hydraulic Fluid

Remove to fresh air and keep at rest in a position comfortable for breathing. Obtain medical attention if breathing difficulty persists.

Symptoms: Overexposure may be irritating to the respiratory system.

Remove contaminated clothing. Drench affected area with water or soap and water for at least 15 minutes. Wash contaminated clothing before reuse. Obtain medical attention if irritation develops or persists.

Symptoms: Repeated or prolonged skin contact may cause irritation.

Rinse cautiously with water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Obtain medical attention.

Symptoms: Direct contact with the eyes is likely irritating.

Do NOT induce vomiting. Rinse mouth. Immediately call a POISON CENTER or doctor/physician.

Symptoms: Ingestion is likely to be harmful or have adverse effects.

Use extinguishing media appropriate for surrounding fire.

Do not use a heavy water stream. Use of heavy stream of water may spread fire.

Fire Hazard: Not flammable but will support combustion. Explosion Hazard: Product is not explosive.

Use water spray or fog for cooling exposed containers.

Evacuate unnecessary personnel. Stop leak if safe to do so. Eliminate ignition sources. Ventilate area.

Prevent entry to sewers and public waters.

Clean up spills immediately and dispose of waste safely. Spills should be contained with mechanical barriers. Transfer spilled material to a suitable container for disposal.

Practice good housekeeping - spillage can be slippery on smooth surface either wet or dry. Any proposed use of this product in elevated-temperature processes should be thoroughly evaluated to assure that safe operating conditions are established and maintained.

Store in a dry, cool and well-ventilated place. Keep container closed when not in use. Keep/Store away from direct sunlight, extremely high or low temperatures and incompatible materials.

Handle in accordance with good industrial hygiene and safety procedures. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.

Ensure adequate ventilation, especially in confined areas. Emergency eye wash fountains and safety showers should be available in the immediate vicinity of any potential exposure. Ensure all national/local regulations are observed.

Wear chemically resistant protective gloves.

Chemical goggles or safety glasses.

Use a NIOSH-approved respirator or self-contained breathing apparatus whenever exposure may exceed established Occupational Exposure Limits.

Wear suitable protective clothing. Materials for Protective Clothing: Chemically resistant materials and fabrics.

Do not allow the product to be released into the environment.

Stable under recommended handling and storage conditions (see section 7).

Hazardous reactions will not occur under normal conditions.

Hazardous polymerization will not occur.

Direct sunlight, extremely high or low temperatures, heat, hot surfaces, sparks, open flames, incompatible materials, and other ignition sources.

Strong acids, strong bases, strong oxidizers.

No decomposition expected under normal use and storage conditions.

Dispose of waste material in accordance with all local, regional, national, provincial, territorial and international regulations.