Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- W1380A-X
- Product Code
- W1380A-X
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
This product is a toner preparation that is used in HP LaserJet Pro 3001, HP LaserJet Pro 3002, HP LaserJet Pro 3003, HP LaserJet Pro 3004, HP LaserJet Pro MFP 3101, HP LaserJet Pro MFP 3102, HP LaserJet Pro MFP 3103 and HP LaserJet Pro MFP 3104 series printers.
Uses advised against
None known.
Manufacturers & Suppliers
HP Inc.
manufacturer
1501 Page Mill Road, Palo Alto, CA 94304-1112, United States
650-857-1501
Emergency Contacts
HP Inc. health effects line (Toll-free within the US)
1-800-457-4209
HP Inc. health effects line (Direct)
1-760-710-0048
HP Inc. Customer Care Line (Toll-free within the US)
1-800-474-6836
HP Inc. Customer Care Line (Direct)
1-208-323-2551
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Wax | --- | 20% | No |
| Amorphous silica | 7631-86-9 | 2.5% | No |
Material name: W1380A-X
First Aid Measures
Emergency procedures for chemical exposure incidents
Move person to fresh air immediately. Get medical attention if symptoms occur.
Wash affected areas thoroughly with mild soap and water. Get medical attention if irritation develops or persists.
Do not rub eyes. Flush thoroughly with water. If irritation occurs, get medical assistance.
Rinse mouth out with water. Drink one to two glasses of water. Get medical attention if symptoms occur.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, water, or dry chemical
None known.
Like most organic material in powder form, toner can form explosive dust-air mixtures when finely dispersed in air.
Not established.
Firefighter Protection
Not available.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid contact with skin and eyes.
Avoid runoff into storm sewers and ditches which lead to waterways.
Slowly vacuum or sweep the material into a bag or other sealed container.
Materials: bag or other sealed container
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep out of the reach of children. Avoid inhalation of dust and contact with skin and eyes. Use with adequate ventilation. Keep away from excessive heat, sparks, and open flames.
Keep out of the reach of children. Keep tightly closed and dry. Store at room temperature.
Keep away from excessive heat, sparks, and open flames.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
None known. No exposure limits noted for ingredient(s).
No personal hand protective equipment required under normal conditions of use.
No personal eye/face protective equipment required under normal conditions of use.
No personal respiratory protective equipment required under normal conditions of use.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal storage conditions.
Not available.
Will not occur.
None.
Acids, Bases, Oxidizing agents, Reducing agents.
Carbon monoxide and carbon dioxide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN2807
- Shipping Name
- Magnetized material
- Transport Class
- 9
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for W1380A-X?
The signal word is no signal word.
What is the physical form of W1380A-X?
W1380A-X is a solid. appearing as fine powder with black. color. It has slight plastic odor odor.
What is the solubility of W1380A-X?
Negligible in water. Partially soluble in toluene and xylene.
What is W1380A-X used for?
This product is a toner preparation that is used in HP LaserJet Pro 3001, HP LaserJet Pro 3002, HP LaserJet Pro 3003, HP LaserJet Pro 3004, HP LaserJet Pro MFP 3101, HP LaserJet Pro MFP 3102, HP LaserJet Pro MFP 3103 and HP LaserJet Pro MFP 3104 series printers.
What are the hazard statements for W1380A-X?
This substance has 1 hazard statement:
- Not available.
What is the melting point of W1380A-X?
The melting point is 194 - 284 °F (90 - 140 °C) and the boiling point is Not applicable.